42510ESDA-TR1 Datasheet, PDF (1/2 Pages) Cooper Bussmann, Inc. – Four-Channel ESD Suppressor PolySurg™ 42510ESDA-TR1

Four-Channel ESD Suppressor
PolySurg™ 42510ESDA-TR1
HALOGEN
HF
FREE
Pb
Surface Mount Device
Description
The Cooper Bussmann^® PolySurg™ 42510ESDA four-channel array ESD
suppressor protects sensitive electronic circuits from the threat of
electrostatic discharge (ESD) without distorting data signals. This protection is
a result of its ultra-low capacitance (0.1pF typical) that is well suited for HDMI
ESD protection applications.
Features
• Halogen free, lead free and RoHS compliant for global applications
• Ultra-low capacitance (0.1pF typical) ideally suited for protecting high
speed data applications
• Provides ESD protection with fast response time (<1ns) allowing
equipment to pass the IEC 61000-4-2 Level 4 test
• Four (4) channel array
• Zero signal distortion
• Low leakage current (<0.01µA typical)
Applications
Applied to a high speed signal interface, the 42510ESDA protects:
• Digital video equipment
• Mobile phone
• GPS Antenna
• Bluetooth communication equipment antenna circuit
• IEEE-1394
• DVI
• HDMI
Part Numbering System:
4 2510 ESDA- TR1
• Four channel SIN 1 chip
• 2.5x1.0mm footprint size
• ESDA ESD Suppressor
• Tape and reel packaging code
Packaging
• Supplied in tape and reel packaging, 5000 parts per seven inch
(178mm) reel per EIA Standard 481-1
Ordering Information
Catalog Number Description
42510ESDA-TR1
5000 suppressors in paper tape on a 7 inch
(178mm) reel
Electrical Specifications
Characteristic
Value/Range
Rated Voltage (max)
12V
Leakage Current (max @ 12Vdc)
0.01μA
Trigger Voltage (Vt)
Clamping Voltage (Vc)
Capacitance (Cp) @1MHz*
300V Typical
30V Typical
0.1pF Typical
Response Time
<1ns
ESD Voltage Capability, IEC 61000-4-2
8kV
Contact Discharge Mode
ESD Voltage Capability, IEC 61000-4-2
15kV
Air Discharge Mode
ESD Withstand Pulses
100 Times Minimal
* Note, Capacitance measured with 1Vrms
Environmental Specifications
Characteristic
Value
Load Humidity
+85°C/90%RH with rated voltage for 1000 hrs
Thermal Shock
-40°C to +85°C, 30 minute cycle, 5 cycles
Moisture Resistance Test
J-STD-020 Standard: Level 2
(1 year floor life under 30°C/65%RH conditions
Operating Temperature Range -40°C to +85°C (-40°F to 185°F)
Storage Temperature Range -55°C to +125°C (-67°F to +257°F)
0810 BU-SB10816
Page 1 of 2
Data Sheet 4378