1BS101 Datasheet, PDF (1/1 Pages) Cooper Bussmann, Inc. – Modular Fuseblocks

Modular Fuseblocks
0-600V, 100 Amps
Catalog Symbol: 1BS101
Voltage Rating: 600V
Current Rating: 100A
Base: Molded black phenolic, 150°C
Mounting Studs:
Zinc-plated steel
⁄Ω¢∑ - 20 ≈ ⁄Ω™∑ hex head bolt
Nut: Zinc-plated steel
Washer: Zinc-plated steel
⁄Ω¢∑ Belleville washer
Connector: Tin-plated aluminum
Wire Range: Single #2/0 through single #14AWG
Wire Types: Copper or aluminum
Stranded or solid
Withstand Rating:
200,000A RMS. SYM. or the interrupting rating of the fuse
used, whichever is smaller.
Dovetail Interlock:
Dovetail interlock feature on each side of the base allows
mounting multiple poles adjacent to one another.
Torque Requirements:
Conductor Set Screw: 120 lbs-in
Fuse Mounting Bolt: 70 lbs-in
Agency Approvals:
U.L. Recognized, Guide No. IZLT2, File No. E14853
CSA Certified, Class 6225-01, File 47235
CE logo denotes compliance with European Union Low Voltage Directive
(50-1000 Vac, 75-1500 Vdc). Refer to BIF document #8002 or contact
Bussmann Application Engineering at 314-527-1270 for more information.
Bussmann^®
1BS101
Mounting Dimensions mm (inches)
Catalog No.
“A”
“B”
FWA 70A-100A
49.3 (1.94) 16.0 (0.63)
FWH 35B-60B
58.9 (2.32) 25.6 (1.01)
FWH 70B-100B
72.4 (2.85) 39.1 (1.54)
FWX 35A-60A
59.4 (2.34) 26.1 (1.03)
FWX 70A-100A
59.7 (2.35) 26.4 (1.04)
KAC 1-30
63.5 (2.50) 30.2 (1.19)
KAC 35-60
88.9 (3.50) 55.6 (2.19)
KAC 70-100
105.7 (4.16) 72.3 (2.85)
KBC 35-60
88.9 (3.50) 55.6 (2.19)
KBC 70-100
93.0 (3.66) 59.6 (2.35)
LPJ 70SP-100SP
95.5 (3.76) 62.2 (2.45)
JJS 70-100
59.9 (2.36) 26.6 (1.05)
JKS 70-100
96.3 (3.79) 62.9 (2.48)
80-100L14C
89.9 (3.54) 56.6 (2.23)
80-100L09C
112.0 (4.41) 78.7 (3.10)
“C”
95.4 (3.75)
104.9 (4.13)
118.3 (4.66)
105.4 (4.15)
105.6 (4.16)
109.4 (4.31)
134.8 (5.31)
151.6 (5.97)
134.8 (5.31)
138.9 (5.47)
141.4 (5.57)
105.9 (4.17)
142.2 (5.60)
135.8 (5.35)
157.9 (6.22)
Dimensions
CL
INTERLOCKING
DOVETAIL TAB
44.7
(1.76)
BLOCK NO. 1BS101
This block is furnished with an interlocking
CL
dovetail feature as shown. When mounting
multiple fuseblocks side by side, center-to-
center distance between mounting holes
each pole is 44.58 (1.755).
11.4
(.45)
CLEARANCE
FOR
SCREW HEAD
Maximum fuse blade width is 25.40 (1.000).
5.1 _X 7.7 _{MOUNTING HOLE SLOT FOR #10 SCREW}
(.20) (.30)
11.2
'A'
(.44)
REF.
16.8
10.4
(.66)
(.41)
22.4
(.88)
50.8
34.8
(1.37)
(2.00)
26.7
(1.05)
10.4
(.41)
7.1
(.28)
5.1
(.20)
6.4
(.25)
MOUNTING
9.4
SURFACE
(.37)
3.3
(.13)
39.62
(1.560)
'B'
REF.
39.62
(1.560)
ANTI-ROTATION PIN
44.5
(1.75)
7.6
(.30)
'C'
REF.
MOUNTING HOLE ARRANGEMENT
39.62
(1.560)
5.16
(.203)
DIA.
39.62
(1.560)
9.53 _DIA.
(.375)
The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this BIF document are by definition uncontrolled. This bul-
letin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to
change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information
contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
12-16-98
SB98107 Rev. A
Form No. 1BS101
Page 1 of 1
BIF Doc #1206