0603ESDA2TR2 Datasheet, PDF (1/2 Pages) Cooper Bussmann, Inc. – 0603ESDA2-TR2 ESD Suppressor PolySurg™ Series

0603ESDA2-TR2 ESD Suppressor
PolySurg^™ Series
HALOGEN
HF _Pb
FREE
Surface Mount Device
Description
The second generation PolySurg™ 0603ESDA2-TR2 ESD Suppressors
protect valuable high-speed data circuits from ESD damage without distorting
data signals as a result of its ultra-low (0.15pF maximum) capacitance.
Features
• Lead free, halogen free materials
• 0603/1608 footprint surface mount device
• Ideal ESD protection for high frequency, low voltage applications
• Exceeds testing requirements of IEC 61000-4-2
• Ultra low capacitance (0.15pF maximum)
• Very low leakage current
• Fast response time
• Bi-directional
Specifications
Performance Characteristics Units Min
Continuous Operating Voltage
Vdc
--
Clamping Voltage¹
V
--
Trigger Voltage²
V
--
ESD Threat Voltage Capability
kv
--
Capacitance (@ 1MHz)
pF
--
Leakage Current (@ 12Vdc)
nA
--
Peak Current
A
--
Operating Temperature
°C
-55
ESD Pulse Withstand
# Pulses 20
Typ
14
35
350
8
0.10
<0.1
30 Typ.
+25
>500
Max
30
60
--
15
0.15
100
45
+105
--
1. Per IEC 61000-4-2, 30A @ 8kV, Level 4, contact discharge, measurement made 30ns
after initiation of pulse.
2. Trigger measurement made using Transmission Line Pulse (TLP) method.
Applications
• Computers and peripherals
• Blu-Ray/DVD players
• Satellite and HD radio
• PDAs
• Digital camcorders
• Set top Boxes
• DSL Modems
• High speed data ports
- USB 2.0/3.0
- High speed ethernet
- Infiniband^®
• HDTV Equipment
• A/V Equipment
• Cell phones
• Digital still cameras
• MP3 / Multimedia players
• External storage
• GPS
- IEEE 1394
- DVI
- HDMI
Part Numbering System: 0603 ESDA 2 TR2
Package size
Product family
Second generation designator
Packaging code
Packaging
• 5000 pieces in paper tape on 7 inch diameter (178mm) reel per
EIA Standard 481.
Packaging Code
Package Code Suffix Description
-TR2
5000 pieces in paper tape on 7 inch diameter
(178mm) reel per EIA Standard 481
Device Marking
PolySurg™ ESD Suppressors are marked on the tape and reel packages, not
individually. Since the product is bi-directional and symmetrical, no orientation
marking is required.
Design Consideration
The location in the circuit for the 0603ESDA2-TR2 Series has to be carefully
determined. For better performance, the device should be placed as close to
the signal input as possible and ahead of any other component. Due to the
high current associated with an ESD event, it is recommended to use a
“0-stub” pad design (pad directly on the signal/data line and second pad
directly on common ground).
Processing Recommendations
The 0603ESDA2-TR2 Series currently has a convex profile on the top surface
of the part. This profile is a result of the construction of the device. They can
be processed using standard pick-and-place equipment. The placement and
processing techniques for these devices are similar to those used for chip
resistors and chip capacitors.
0612 BU-SB12433
Page 1 of 2
Data Sheet 4419