SFX-200G Datasheet, PDF (4/8 Pages) Connor-Winfield Corporation – Synchronous Clock Generators

Output Load and Power Supply Filtering Recommendations
Figure 2
*
*
*
* It is highly recommended
that either a linear regulator
or bypass capacitors be
used. Typical values would
be 10 uF, 0.1 uF, 100 pF.
Input A
Input B
SFX-200G
In
(Pin 1)
CIn
(Pin 2)
Frequency
Divider
Frequency
Divider
In Sel
(Pin 7)
Out Sel
(Pin 8)
Disable
(Pin 16)
Microprocessor
Loop
Filter
470 kΩ
PECL
VCXO 1
PECL
VCXO 2
LD
(Pin 10)
Monitor
(Pin 11)
Q
(Pin 12)
Q
(Pin 14)
V_CC -2 V_DC
50Ω
50Ω
(FOUT)
Package Dimensions
Figure 3
Recommended Footprint Dimensions
Figure 4
1.200
[30.48mm]
Pin 1
1.000
[25.40mm]
0.150
[3.81mm]
0.700
[17.78mm]
9 10 11 12 13 14 15 16
0.980
[24.89mm]
87
21
0.100
[2.54mm]
0.279
[7.09mm]
(0.285" MAX)
16
9
1
8
Data Sheet #: SG152 Page 4 of 8 Rev: 00 Date: 5/2/07
© Copyright 2007 The Connor-Winfield Corp. All Rights Reserved Specifications subject to change without notice