PB223-156M Datasheet, PDF (2/2 Pages) Connor-Winfield Corporation – Low Jitter LVPECL Clock Oscillator

2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: [phone]
Fax: [phone]
www.conwin.com
Parameter
Enable Input Voltage: (High) (Vih)
Disable Input Voltage: (Low) (Vil)
Enable Time:
Disable Time:
Standby Current: (When Osc. is disabled)
OE Input Characteristics
Minimum
Nominal
90%Vcc
-
-
-
-
-
-
-
-
12
Maximum
-
10%Vcc
2
200
-
Package:
Package Characteristics
Hermetically sealed ceramic package and metal cover
Environmental Characteristics
Vibration:
Shock:
Soldering Process:
Vibration per Mil Std 883E Method 2007.3 Test Condition A.
Mechanical Shock per Mil Std 883E Method 2002.4 Test Condition B.
RoHS compliant lead free. See soldering profile on page 2 below.
Notes:
1. Includes calibration @ 25°C, frequency stability vs. change in temperature, supply voltage and load variations, shock and vibration and 20 years aging.
2. Frequency stability vs. changein supply voltage, Vcc±5% @ 25°C.
3. When the oscillator is disabled the outputs are at high impedance. Outputs are enabled with no connection on E/D pad.
4. Outputs must be terminated into 50 ohms to Vcc – 2V or Thevenin equivalent.
5. Duty cycle measured at 50% output voltage swing.
Units
Vdc
Vdc
ms
ns
mA
Notes
3
3
Package Outline
0.197
(5.0mm)
0.275
(7.0mm)
#6
#5
#4
1707
PB223
156.25 MHZ
0.055
(1.4mm)
#1
#2
#3
H
0.102
(2.6mm)
Dimensional Tolerance
+/-0.008 (+/-0.2mm)
Dimension H = 1.47mm ±0.2mm for all 156.25M part numbers
Dimension H = 1.75mm ±0.2mm for all frequencies other than 156.25M
Suggested Pad Layout
Ground
C
Bypass
0.200
(5.08mm)
0.100
(2.54mm)
0.079
(2.00mm)
0.165
(4.20mm)
Top View
1
Keep
Out
Area
Ground
0.070
(1.80mm)
Pad Connections
1: Enable / Disable (OE)
2: N/C
3: Ground
4: Output Q
5: Complementary Output Q
6: Supply Voltage (Vcc)
OE Enable / Disable Function
Function:
Low:
High or Open:
Output
Disabled (High Impedance)
Enabled
Test Circuit
2
OE
N/C
Vcc = Vcc2 = 3.3Vdc
Output Waveform
Duty Cycle
Q
80%
50%
20%
Q
tr
tf
Phase Noise Plot
Typical Phase Noise Plot for PB223-156.25M
Solder Profile
Temperature
260°C
220°C
180°C
150°C
120°C
260°C
0
10 s
Up to 120 s
Typical
60 to 90 s
Typical
Meets IPC/JEDEC J-STD-020C
Tape and Reel Dimensions
Direction of Feed (Customer)
16mm Tape
Specifications subject to change without notification. See Connor-Winfield's website for latest revision.
© Copyright 2017 The Connor-Winfield Corporation Not intended for life support applications.
Bulletin
Page
Revision
Date
Ec277
2 of 2
08
22 March 2017