OVC5EQ2BB Datasheet, PDF (2/2 Pages) Connor-Winfield Corporation – 5.0V Sinewave OCVCXO

THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX [phone].
PHONE [phone].
WWW.CONWIN.COM
PRODUCT
DATA
SHEET
CRYSTAL CONTROLLED OSCILLATORS
ENVIRONMENTAL CHARACTERISTICS
Temperature Cycle: Per MIL-STD-883, Method 1010, Condition B. -55°C to 125°C, 20 cycles,10 minute dwell, 1minute
transition.
Gross Leak Test: Per MIL-STD-202, Method 112, Condition D. No bubbles in flourinert (FC-43) at 125°C ±5°C for 20
seconds.
SOLDERING
Pin Solderability: Per MIL-STD-883, Method 2003. 8 hour steam age prior to 245°C ±5°C Solder pot dip, 95% Coverage.
Resistance to Solder Heat: Per MIL-STD-202, Method 210, Condition C. Wave: Topside board-mount product, 260°C
±5°C for 20 Seconds.
MECHANICAL CHARACTERISTICS
Vibration: Per MIL-STD-202, Method 204, Condition A. 10G’s peak, 10Hz to 500Hz, 15minute cycles 12 times each
perpendicular axis.
Shock: Per MIL-STD-202, Method 213, Condition D. 500G’s, 1ms, halfsine, 3 shocks per direction.
Moisture Resistance: Per MIL-STD-202, Method 106. 95% RH @ 65°C, 10 cycles 10°C to 65°C.
TOP VIEW
I^{( W} 0838
OVC5EQ2BB
40.0 MHz
Temperature
260°C
220°C
180°C
150°C
120°C
Solder Profile
260°C
Package Outline
0
120 S
Max.
10 S
60 S
Max.
Time
360 Sec. Max.
Pin Connections
Pin Connection
1
Output
2
Ground, Case
3
Control Voltage
4
N/C
5
Vcc
Test Circuit
Control
Voltage
Dimensional Tolerance:
±.005 (.127mm)
DATA SHEET #: ^Cx153
PAGE 2 OF 2
REV: ⁰⁰
DATE: ^08/07/08
Specifications subject to change without notice.
aCopyright 2008 Connor-Winfield all rights reserved.