CSOV3S3 Datasheet, PDF (2/2 Pages) Connor-Winfield Corporation – SURFACE MOUNT 3.3V HCMOS STRATUM 3 OCXO

THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX [phone].
PHONE [phone].
WWW.CONWIN.COM
PRODUCT
D AT A
SHEET
CRYSTAL CONTROLLED OSCILLATORS
ENVIRONMENTAL CHARACTERISTICS
Temperature Cycle: Per MIL-STD-883, Method 1010, Condition B. -55°C to 125°C, 20 cycles,10 minute dwell, 1m inute
transition.
SOLDERING
Pad Solderability: Per MIL-STD-883, Method 200. 8 hour steam age prior to 254°C ±5°C Solder pot dip, 95% Coverage.
Solder Reflow: The component solder internal to this device has a melt ing point of 221°C, the peak temperature inside the
device should be less than or equal to 220°C for a maximum of 10 seconds.
MECHANICAL CHARACTERISTICS
Vibration: Per MIL-STD-202, Method 204, Condition A. 10G’s peak, 10Hz to 500Hz, 15mi nute cycles 12 times each
perpendicular axis.
Shock: Per MIL-STD-202, Method 213, Condition D. 500G’s, 1ms, half sine, 3 shocks per direction.
Moisture Resistance: Per MIL-STD-202, Method 106. 95% RH @ 65°C, 10 cycles 10°C to 65°C.
PACKAGE LAYOUT
PIN CONNECTIONS
.330 max
(8.382mm)
Pin Connection
1
Control Voltage
7
Ground (Case)
8
Output
14 Vcc
Dimensional Tolerance:
±.005 (.127mm)
KEEP OUT AREA
90%
50%
10%
TEST CIRCUIT
CONTROL
VOLTAGE
3.0Vdc
POWER
SUPPLY
3.3Vdc
14
8
1
7
DATASHEET #: ^Cx043 PAGE 2 OF 2
REV: ⁰¹
DATE: ^08/11/06
.830
(21.08mm)
.565
(14.35mm)
Temperature
260°C
220°C
180°C
150°C
120°C
SOLDER PROFILE
260°C
0
120 S
Max.
10 S
60 S
Max.
Time
360 Sec. Max.
Specifications subject to change without notice.
aCopyright 2001 Connor-Winfield all rights reserved.