ASOF3S3P Datasheet, PDF (2/2 Pages) Connor-Winfield Corporation – 3.3V SURFACE MOUNT STRATUM 3 PLUS HCMOS OCXO

THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX [phone].
PHONE [phone].
www.conwin.com
PRODUCT DATA
CRYSTAL CONTROLLED OSCILLATORS
SHEET
ENVIRONMENTAL CHARACTERISTICS
Temperature Cycle: Per MIL-STD-883, Method 1010, Condition B. -55°C to 125°C, 20 cycles,10 minute dwell, 1m inute
transition.
SOLDERING
Pad Solderability: Per MIL-STD-883, Method 2003. 8 hour steam age prior to 245°C ±5°C Solder pot dip, 95%
Coverage.
Solder Reflow: The component solder internal to this device has a melt ing point of 221°C, the peak temperature insi de the
device should be less than or equal to 220°C for a maxim um of 10 seconds.
MECHANICAL CHARACTERISTICS
Vibration: Per MIL-STD-202, Method 204, Condition A. 10G’s peak, 10Hz to 500Hz, 15m inute cycles 12 times each
perpendicular axis.
Shock: Per MIL-STD-202, Method 213, Condition D. 500G’s, 1ms, half sine, 3 shocks per direction.
Moisture Resistance: Per MIL-STD-202, Method 106. 95% RH @ 65°C, 10 cycles 10°C to 65°C.
Pin Connection
1
N/C
7
Ground (Case)
8
Output
14 Vcc
OUTPUT WAVEFORM
90%
50%
10%
SUGGESTED PAD LAYOUT
.330 max
(8.382mm)
KEEP OUT AREA
.830
(21.08mm)
Dimensional Tolerance:
±.005 (.127mm)
.565
(14.35mm)
DATASHEET #: ^Cx059 PAGE 2 OF 2
REV: ⁰³
DATE: ^11/09/05
Specifications subject to change without notice.
aCopyright 2001 Connor-Winfield all rights reserved.