TA5G-10M Datasheet, PDF (1/2 Pages) Connor-Winfield Corporation – Model TA5G 5.0x7.0mm Surface Mount TCXO

2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: [phone]
Fax: [phone]
www.conwin.com
US Headquarters
630-851-4722:
European Headquarters:
[phone]
Bulletin
Page
Revision
Date
Tx182
1 of 2
00
01 Feb 2007
Model TA5G
5.0x7.0mm
Surface Mount TCXO
Description
The Connor Winfield model TA5G is a
5x7mm Surface Mount Temperature
Compensated Crystal Controlled
Oscillators (TCXO) with a Tri-State
LVCMOS output. The TA5G is
designed for applications requiring
high frequency stability, low jitter over
the commercial temperature range.
The RoHS compliant, surface mount
package is design for high-density
mounting and is optimum for mass
production.
TA5G 0706
10MHz
Features
TCXO
3.3V Operation
LVCMOS Output Logic
Frequency Stability: ±2.50ppm
Temperature Range: 0 to 70°C
Low Jitter <1pS RMS
Tri-State Enable/Disable Function
Surface Mount Package
Tape and Reel Packing
RoHS Compliant / Lead Free
ABSOLUTE M AXIMUM RATING S
PARAMETER
Storage Temperature
Supply Voltage
UNITS
(Vcc)
MINIMUM
-55
-0.5
NOMINAL
-
-
MAXIMUM
125
6.0
UNITS
°C
Vdc
TABLE 1
NOTE
OPERATING SPECIFIC ATIONS
PARAMETER
Frequency Range
Frequency Calibration @ 25°C
Frequency Stability
Operating Temperature Range
Aging First Year
Aging Per Year
Supply Voltage Variation.
Load Coefficient, ±5pF
Supply Voltage
Supply Current
Jitter (BW=10Hz to 20MHz)
Jitter (BW=12kHz to 20MHz)
SSB Phase Noise at 10Hz offset
SSB Phase Noise at 100Hz offset
SSB Phase Noise at 1KHz offset
SSB Phase Noise at >10KHz offset
(Vcc)
(Icc)
MINIMUM
6.4
-1.00
-2.50
0
-1.00
-1.00
-
-
3.135
-
-
-
-
-
-
-
NOMINAL
-
-
-
-
-
-
-
-
3.3
6
-
-
-
-
-
-
MAXIMUM
52
1.00
2.50
70
1.00
1.00
±0.2
±0.2
3.465
10
5
1
-80
-110
-135
-150
UNITS
MHz
ppm
ppm
°C
ppm
ppm
ppm
ppm
Vdc
mA
ps rms
ps rms
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
TABLE 2
NOTE
1
2
INPUT CHARACTERISTICS for ENABLE / DISABLE FUNCTION (Pin 8)
PARAMETER
MINIMUM NOMINAL MAXIMUM
Enable Voltage (High) or open circuit
(Vih) 70% Vdd
-
-
Disable Voltage (Low) Output Tri-stated
(Vil)
-
-
30% Vdd
UNITS
Vdc
Vdc
TABLE 3
NOTE
3
LVCMOS OUTPUT CHARACTERISTICS
TABLE 4
PARAMETER
MINIMUM NOMINAL MAXIMUM UNITS
NOTE
LOAD
-
-
15
pF
Voltage
(High)
(Voh) 90%Vcc
-
-
Vdc
(Low)
(Vol)
-
-
10%Vcc
Vdc
Current
(High)
(Ioh)
-4
-
-
mA
(Low)
(Iol)
-
-
4
mA
Duty Cycle at 50% of Vcc
45
50
55
%
Rise / Fall Time 10% to 90%
-
-
8
ns
Note:
1) Initial calibration @ 25°C. Specifications at time of s hipment after 48 hours of operation.
2) Frequency stability vs. change in tem perature. [±(Fmax – Fmin)/2.Fo]
3) Leave Pad 8 unconnected if enable / d isable function is not required. W hen tri-stated, the
output stage is disabled but the os cillator and compensation circuit ar e still active (current
consumption < 1 mA).
Specifications subject to change without notice. All dimensions in inches. © Copyright 1998 The Connor-Winfield Corporation