SCG6500NT Datasheet, PDF (1/12 Pages) Connor-Winfield Corporation – Synchronous Clock Generator

2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: [phone]
Fax: [phone]
www.conwin.com
SCG6500NT
Synchronous Clock
Generator
PLL
Bulletin
SG034
Page
1 of 12
Revision _{(ADVANCED) A05}
Date
24 JUNE 02
Issued By
MBatts
Features
• Digital PLL Control
• 622.08 MHz LVPECL Output, Ultra-low Jitter
• 155.52 MHz LVPECL Output, Ultra-low Jitter
• Two 77.76 MHz LVPECL Outputs, Low Litter
• 8 kHz LVPECL Output
• Dual 8 kHz Input References
• Supports Manual and Autonomous Modes
• 3.3 V_DC Power Supply
Applications
The SCG6500NT is designed for use as a reference input for
OC-192 Framers and SERDES. It generates less than 1 psRMS
jitter over the OC-192 bandwidth.
SCG6500NT is well suited for use in line cards, service
termination cards and similar functions to provide reliable reference,
phase locked, synchronization for TDM, PDH, SONET, and SDH
network equipment. The SCG6500NT provides a jitter filtered,
wander following output signal synchronized to a superior Stratum
or peer input reference signal.