P731 Datasheet, PDF (1/2 Pages) Connor-Winfield Corporation – 3.3V 5 x 7mm SURFACE MOUNT HIGH FREQUENCY LVPECL CLOCK OSCILLATOR

THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX [phone].
PHONE [phone].
WWW.CONWIN.COM
PRODUCT
D AT A
SHEET
CRYSTAL CONTROLLED OSCILLATORS
3.3V 5 x 7mm SURFACE MOUNT HIGH FREQUENCY
LVPECL CLOCK OSCILLATOR
P731
ABSOLU TE MAX IMUM RATING S
PARAMETER
Storage Temperature
Supply Voltage
Input Voltage
UNITS
(Vcc)
(Vcc)
MINIMUM
-40
-0.5
-0.5
NOMINAL
-
-
-
MAXIMUM
85
4.6
4.6
UNITS
°C
Vdc
Vdc
TABLE 1.0
NOTE
OPERATING SPECIFIC ATIONS
PARAMETER
Center Frequency
Total Frequency Tolerance
Operating Temperature Range
Supply Voltage
Supply Current
Jitter (BW=10Hz to 20MHz)
Jitter (BW=12kHz to 20MHz)
(Fo)
(Vcc)
(Icc)
MINIMUM
250
-50
0
3.135
-
-
-
NOMINAL
-
-
3.3
60
-
-
MAXIMUM
800
50
85
3.465
100
8
2
UNITS
MHz
ppm
°C
Vdc
mA
pS RMS
pS RMS
TABLE 2.0
NOTE
1
DESCRIPTION
The Connor-Winfield P731 is a
3.3V Crystal Oscillator (XO) with
LVPECL Differential outputs and
enable/disable function. The
P731 is designed using a 2X or
4X PLL multiplication to achieve
the high frequency output.
INPUT CHARACTERISTICS
PARAMETER
Disable Input Voltage (Low)
(Vil)
Enable Input Voltage (High)
(Vih)
PECL OUTPUT CHARACTERISTICS
PARAMETER
LOAD
Voltage
(High)
(Voh)
(Low)
(Vol)
Duty Cycle
Rise / Fall Time 20% to 80%
MINIMUM
-
2.275
NOMINAL
-
-
MAXIMUM
1.68
-
UNITS
Vdc
Vdc
TABLE 3.0
NOTE
2
2
MINIMUM
-
2.275
-
45
-
NOMINAL
-
-
-
50
-
MAXIMUM
50
-
1.68
55
0.5
UNITS
Ohms
Vdc
Vdc
%
nS
TABLE 4.0
NOTE
3
4
PACKAG E CHARACTERISTICS
Package
TABLE 5.0
Hermetically sealed ceramic package and metal cover.
FEATURES
250 to 800MHz
3.3V OPERATION
LOW JITTER <1pS RMS
OVERALL FREQUENCY TOLERANCE:
+/-50 PPM
TEMPERATURE RANGE: 0 to 85°C
DIFFERENTIAL LVPECL OUTPUTS
TABLE 6.0
Pin
Connection
1
Enable / Disable
2
N/C
3
Ground
4
Q Output
5
Q Output
6
Vcc
Enable / Disable Function (Pad 1)
High or Open
Low
TABLE 7.0
Output
Enable
Disable (High Impedance)
ENABLE / DISABLE FUNCTION
SURFACE MOUNT PACKAGE
TAPE AND REEL PACKAGING
RoHS COMPLIANT / LEAD FREE
ORDERING INFORMATION
Notes
1) Includes calibration @ 25°C, frequency stability vs. temperature, supply and load variations, shock, vibration and 20
years aging.
2) When the oscillator is disabled, the outputs are at High Impedance. Output is enabled with no connection on pad 1.
3) Output must be terminated into 50 ohms to Vcc – 2V or Thevenin equivalent.
4) Duty Cycle measured at 50% of output swing.
P731
LVPECL
CLOCK
SERIES
- 704.38058 MHz
CENTER
FREQUENCY
Specifications subject to change without notice.
DATASHEET #: ^Ec236 PAGE 1 OF 2
REV: 00
DATE: ^07/07/06
aCopyright 2001 Connor-Winfield all rights reserved.