P701 Datasheet, PDF (1/2 Pages) Connor-Winfield Corporation – 3.3V 5X7mm SURFACE MOUNT HIGH FREQUENCY LVPECL CLOCK OSCILLATOR

THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX [phone].
PHONE [phone].
WWW.CONWIN.COM
PRODUCT
DATA
SHEET
CRYSTAL CONTROLLED OSCILLATORS
3.3V 5 x 7mm SURFACE MOUNT HIGH FREQUENCY
LVPECL CLOCK OSCILLATOR
P701
ABSOLUTE MAXIMUM RATINGS
PARAMETER
Storage Temperature
Supply Voltage
Input Voltage
UNITS
(Vcc)
(Vcc)
MINIMUM
-40
-0.5
-0.5
NOMINAL
-
-
-
MAXIMUM
85
4.6
Vcc+0.5
UNITS
°C
Vdc
Vdc
TABLE 1.0
NOTE
OPERATING SPECIFICATIONS
PARAMETER
Center Frequency
Total Frequency Tolerance
Operating Temperature Range
Supply Voltage
Supply Current
Jitter (BW=10Hz to 20MHz)
Jitter (BW=12kHz to 20MHz)
(Fo)
(Vcc)
(Icc)
MINIMUM
250
-50
0
3.135
-
-
-
NOMINAL
-
-
3.3
60
-
-
MAXIMUM
800
50
70
3.465
100
8
2
UNITS
MHz
ppm
°C
Vdc
mA
pS RMS
pS RMS
TABLE 2.0
NOTE
1
INPUT CHARACTERISTICS
PARAMETER
Disable Input Voltage (Low)
Enable Input Voltage (High)
(Vil)
(Vih)
MINIMUM
-
2.275
NOMINAL MAXIMUM
-
1.68
-
-
UNITS
Vdc
Vdc
TABLE 3.0
NOTE
2
2
LVPECL OUTPUT CHARACTERISTICS
PARAMETER
LOAD
Voltage
(High)
(Voh)
(Low)
(Vol)
Duty Cycle
Rise / Fall Time 20% to 80%
Rise / Fall Time 20% to 80%
MINIMUM
-
2.275
-
45
-
-
NOMINAL
-
-
-
50
-
-
MAXIMUM
50
-
1.68
55
0.5
0.4
UNITS
Ohms
Vdc
Vdc
%
ns
ns
TABLE 4.0
NOTE
3
4
5
6
PACKAGE CHARACTERISTICS
Package
TABLE 5.0
Hermetically sealed ceramic package and metal cover.
TABLE 6.0
Pin
Connection
1 Enable / Disable
2
N/C
3
Ground
4
Q Output
5
Q Output
6
Vcc
Enable / Disable Function (Pad 1)
High or Open
Low
TABLE 7.0
Output
Enable
Disable (High Impedance)
DESCRIPTION
The Connor Winfield P701 is a
Fixed Frequency, Surface Mount
Crystal Controlled Oscillator
(XO) designed for applications
requiring low jitter and a
±50ppm, 0 to 70°C overall
stability, LVPECL Differential
Outputs and Tri-state Enable /
Disable function. The P701 is
designed using a 2X or 4X PLL
multiplication to achieve the high
frequency output.
FEATURES
250 to 800 MHz
3.3V OPERATION
LOW JITTER <1pS RMS
OVERALL FREQUENCY TOLERANCE:
+/-50 PPM
TEMPERATURE RANGE: 0 to 70°C
DIFFERENTIAL LVPECL OUTPUTS
ENABLE / DISABLE FUNCTION
SURFACE MOUNT PACKAGE
TAPE AND REEL PACKAGING
RoHS COMPLIANT / LEAD FREE
Notes
1) Includes calibration @ 25°C, frequency stability vs. temperature, supply and load variations, shock, vibration and 20
years aging.
2) When the oscillator is disabled, the outputs are at High Impedance. Output is enabled with no connection on pad 1.
3) Output must be terminated into 50 ohms to Vcc – 2V or Thevenin equivalent.
4) Duty Cycle measured at 50% of output swing.
5) Rise and fall times measured 20% to 80% of the total output voltage swing.
6) Rise and fall times measured 20% to 80% of the LVPECL levels 1.68V to 2.275V.
DATA SHEET #: ^Ec215 PAGE 1 OF 2
REV: 03
DATE: ^10/11/07
ORDERING INFORMATION
P701 - 312.5M
LVPECL
CLOCK
SERIES
CENTER
FREQUENCY
Specifications subject to change without notice.
aCopyright 2007 Connor-Winfield all rights reserved.