OH100 Datasheet, PDF (1/4 Pages) Connor-Winfield Corporation – Oven Stabilized Oscillator

Available at Digi-Key**
www.digikey.com
STRATUM 3E High Stability
Oven Stabilized Oscillator
OH100 Series
OCXO / VCOCXO
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: [phone]
Fax: [phone]
www.conwin.com
US Headquarters:
630-851-4722
European Headquarters:
[phone]
Bulletin
Page
Revision
Date
Cx205
1 of 4
08
19 Nov 2013
Description
Connor-Winfield’s high stability OH100
series are exceptionally precise frequency
standards, excellent for use in cellular base
stations, test equipment, Synchronous
Ethernet, VSAT and Stratum 3E applications
These unique OCXO / VCOCXO oscillators
provide temperature stabilities in the range
of ±5 ppb to ±50 ppb, over the commercial,
extended commercial or the industrial
temperature range. Power requirements are
1.1W over the commercial temperature range
and 1.5W over the industrial temperature
range after warm-up. Additionally, excellent
aging is achieved through the use of
overtone SC cut crystals.
The OH100 series is available with
CMOS logic or Sinewave output along with
Voltage Controlled Option. These oscillators
provide outstanding phase noise that varies
depending on frequency. Allan Variance
specifications are rated for primary reference
standards. Warm up times are on the order of
5 minutes to 0.10 ppm of final frequency.
11942528O17H041.90030M-H61z003C1F232
Features
• Frequency Range: 5 to 40 MHz
• OCXO - Fixed Frequency
• VCOCXO - Voltage Controlled Option
• 3.3 Vdc or 5.0 Vdc Operation
• Available Frequency Stabilities:
• ±5.0 ppb, ±10.0 ppb, ±20 ppb or ±50 ppb
• Available Temperature Ranges:
0 to 70°C, -20 to 70°C, -20 to 75°C,
-40 to 70°C or -40 to 85°C
• Low Phase Noise / Phase Jitter
• Output: CMOS Logic or Sinewave
• Package: 1.0" x 1.0" x 0.500"
• RoHS Compliant / Lead Free
** Not all
available at
Digi-Key
Ordering Information
OH100-
6
10
03
C
F
- 010.0M
Package
OH100- =
1.0"x1.0"x0.5"
OCXO
Through Hole
Package
Temperature
Range
5 = 0 to 70°C
6 = -40 to 85°C
7 = -20 to 70°C
8 = -40 to 70°C
9 = -20 to 75°C
Frequency
Stability
05 = ±5.0 ppb*
10 = ±10.0 ppb
20 = ±20.0 ppb
50 = ±50.0 ppb
Supply Voltage
03 = 3.3 Vdc
05 = 5.0 Vdc
Output Frequency
Output Type OCXO Type
Frequency Format
C = CMOS F = Fixed -xxx.xM Min
S = Sinewave Freq.
-xxx.xxxxxxM Max
V = Voltage
*Amount of
Controlled numbers after the
Option
decimal point.
M = MHz
* ±5.0 ppb stability models are
only available from 0 to 70°C.
Example Part Number:
OH100-61003CF-010.0M = 1.0" x 1.0" x 0.445" package, -40 to 85°C temperature range, ±10.0 ppb frequency stability, 3.3 Vdc supply
voltage, CMOS square wave output, fixed output frequency OCXO, 10.0 MHz output frequency.
.
OH100-52005CV-010.0M = 1.0" x 1.0" x 0.445" package, 0 to 70°C temperature range, ±20.0 ppb frequency stability, 5.0 Vdc supply
voltage, CMOS square wave output, voltage controlled option, VCOCXO, 10.0 MHz output frequency.
.
OH100-71005SV-010.0M = 1.0" x 1.0" x 0.445" package, -20 to 70°C temperature range, ±10.0 ppb frequency stability, 5.0 Vdc supply
voltage, Sinewave output, voltage controlled ooption, VCOCXO 10.0 MHz output frequency.
Attention: System Designers please review Application Note AN2093:
System Design Information and Printed Circuit Board Layout Guidelines for OCXO Oscillators.
@ www.conwin.com/technologies.html