M77F-010.0M Datasheet, PDF (1/4 Pages) Connor-Winfield Corporation – Precision Sub-Miniature 3.2x5.0mm TCXO / VCTCXO

Precision Sub-Miniature
3.2x5.0mm
TCXO / VCTCXO
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: [phone]
Fax: [phone]
www.conwin.com
US Headquarters:
630-851-4722
European Headquarters:
[phone]
Description
The Connor-Winfield
3.2x5.0mm Temperature
Compensated Crystal Oscillators and
Voltage Controlled Temperature
Compensated Crystal Oscillators are
designed for use in applications
requiring tight frequency stability in a
small package. Through the use of
Analog Temperature Compensation,
this device is capable of holding sub
1-ppm stabilities over wide
temperature ranges.
Features:
2.5V or 3.3V Operation
Clipped Sinewave Output Logic
Sub-Miniature 3.2x5.0mm SMT Package
Frequency Stabilities Available:
±0.50ppm, ±1.00ppm or ±2.00ppm
Temperature Ranges Available:
0 to 70°C
-20 to 70°C
-30 to 85°C
Low Power <2mA
Low Jitter <1pS RMS
Tape and Reel Packaging
RoHS Compliant / Lead Free
Recommended for new designs
Bulletin
Page
Revision
Date
Applications
GPS Receivers
Instrumentation
Femtocells
FTTH, FTTC
Package Layout
Ordering Information
M77F - 010.0M
TCXO
SERIES _{Example Part Number}
Pin Connections
CENTER
FREQUENCY
0.197
(5.0mm)
0.126
(3.2mm)
0.083 Max.
(2.1mm)
0.006 Typ.
(0.15mm)
0.016
(0.41mm)
0.065
(1.65mm) 0.028
(0.71mm)
0.042
(1.07mm)
0.050
(1.27mm)
Top
View
Pad 1
0.008 Typ.
Dimensional Tolerance: _(0.20mm)
+/-0.005 (+/-0.127mm)
Bottom
View
0.028
(0.71mm)
Pad 8
0.042
(1.07mm)
Pad Connection
1
Voltage Control or N/C
2
N/C
3
Do not connect
4
Ground
5
Output
6
N/C
7
Do not connect
8
Supply, Vcc
Ordering Information
M
7
7
F ^{- 010.0M}
Type:
Precision
TCXO
VCTCXO
3.2x5mm
Features:
4 = TCXO, Clipped Sinewave, 2.5Vdc.
7 = TCXO, Clipped Sinewave, 3.3Vdc.
8 = VCTCXO, Clipped Sinewave, 2.5Vdc.
9 = VCTCXO, Clipped Sinewave, 3.3Vdc.
Temperature Range:
5 = 0 to 70° C
7 = -20 to 70° C
8 = -30 to 85° C
Frequency Stability:
E = ± 0.50 ppm
F = ± 1.00 ppm
G = ± 2.00 ppm
Example:
M77F-010.0M = 3.2x5mm, TCXO, Clipped Sinwave,
3.3Vdc, -20 to 70C, +/-1.00ppm, Output Frequency 10.0MHz
Output Frequency:
Frequency Format
-xxx.xM Min.*
-xxx.xxxxxxM Max.*
*Amount of numbers
after the decimal point.
M = MHz
To order an M77F with an output frequency of:
6.4 MHz = M77F-006.4M
20 MHz = M77F-020.0M
38.88 MHz = M77F-038.88M
Tx193
1 of 4
P05
29 May 2008
Standard Frequencies Available *
6.4 MHz 9.72 MHz 10.0 MHz 10.24 MHz 12.5 Mhz 12.8 MHz
13.5 MHz 19.44 MHz 20.0 MHz 20.48 MHz 25 MHz 27 MHz 38.88 MHz
* Available frequencies from the factory for small quantity orders or quick delivery. Additional frequencies are available.
Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation