LM112-155.52M Datasheet, PDF (1/2 Pages) Connor-Winfield Corporation – 5.0x7.0mm Surface Mount LVDS Clock Oscillator Series

2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: [phone]
Fax: [phone]
www.conwin.com
US Headquarters:
630-851-4722
European Headquarters:
[phone]
Bulletin
Page
Revision
Date
Ds030
1 of 2
P01
24 Sep 2009
5.0x7.0mm
Surface Mount LVDS
Clock Oscillator Series
Description
Model SpecificationsFeatures:
The Connor-Winfield LMxxx
- Series are 5x7.0mm
Surface Mount, LVDS,
CW
0846
155.5L2MM1H2z3
Fixed Frequency Crystal
Controlled Oscillator (XO).
Through the use of
multiplication, the LMxxx - Series are
Model LMxxx - Series
5.0 x7.0mm Surface Mount Package
2.5V or 3.3V Operation
LVDS Output Logic
Frequency Stabilities Available:
LM14x / LM34x / LM44x: +/-20ppm
LM11x / LM31x / LM41x: +/-25ppm
LM12x / LM22x / LM32x / LM42x: +/-50ppm
designed for applications requiring tight
LM13x / LM23x / LM33x / LM43x: +/-100ppm
frequency stability, wide temperature
Temperature Ranges Available:
range and low jitter. Operating at 2.5V
or 3.3V supply voltage, the LMxxx -
Series provides LVDS Differential
Outputs with enable / disable function.
The surface mount package is designed
for high-density mounting and is
LM1xx Series: 0 to 70°C
LM2xx Series: -40 to 85°C
LM3xx Series: 0 to 85°C
LM4xx Series: -20 to 70°C
Low Jitter <1pS RMS
Tri-State Enable/Disable
Tape and Reel Packaging
optimum for mass production.
RoHS Compliant / Lead Free
Model Specifications
Absolute Maximum Ratings
Parameter
Storage Temperature
Supply Voltage
Input Voltage
Operating Specifications
Parameter
Center Frequency
Total Frequency Tolerance
Model LMx4x (See Table 9)
Model LMx1x (See Table 9)
Model LMx2x (See Table 9)
Model LMx3x (See Table 9)
Operating Temperature Range
Model LM1xx (See Table 9)
Model LM4xx (See Table 9)
Model LM3xx (See Table 9)
Model LM2xx (See Table 9)
Supply Voltage
Model LMxx2 (See Table 9)
Model LMxx3 (See Table 9)
Supply Current
Period Jitter
Phase Jitter- BW=12KHz to 20MHz
SSB Phase Noise at 10Hz offset
SSB Phase Noise at 100Hz offset
SSB Phase Noise at 1KHz offset
SSB Phase Noise at 10KHz offset
SSB Phase Noise at 100KHz offset
Sub-Harmonics
Units
(Vcc)
(Fo)
Minimum
-55
-0.5
-0.5
Nominal
-
-
-
Maximum
125
4.6
Vcc+0.5
Minimum Nominal Maximum
100
-
670
(See Table 9 for full part number)
-20
-
20
-25
-
25
-50
-
50
-100
-
100
Units
°C
Vdc
Vdc
Table 1.0
Note
Units
MHz
Table 2.0
Note
ppm
1
ppm
1
ppm
1
ppm
1
(Vcc)
(Icc)
0
-20
0
-40
2.375
3.135
-
-
-
-
-
-
-
-
-
-
-
-
-
2.500
3.3
60
3
0.6
-40
-75
-95
-110
-115
-60
70
°C
70
°C
85
°C
85
°C
2.625
3.465
90
5
1.0
-
-
-
-
-
-50
Vdc
Vdc
mA
ps RMS
ps RMS
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc
Input Characteristics
Parameter
Disable Input Voltage (Low)
Enable Input Voltage (High)
(Vil)
(Vih)
LVDS Output Characteristics
Parameter
LOAD
Output Differential Voltage
(Vod)
Output Swing (Differential Output peak to peak) (Vopp)
Duty Cycle measured at 50%
Differential Rise / Fall Time 20% to 80%
Minimum
-
0.7Vcc
Minimum
-
250
500
45
-
Nominal
-
-
Nominal
-
-
700
50
0.3
Maximum
0.3Vcc
-
Units
Vdc
Vdc
Table 3.0
Note
2
2
Maximum
100
450
900
55
0.7
Units
Ohms
mV
mV
%
ns
Table 4.0
Note
3
4
Notes
1) Includes initial tolerance, deviation over temperature, supply and load variations, shock, vibration and 20 years
aging.
2) When the oscillator is disabled, the outputs are at High Impedance. Output is enabled with no connection on pad 1.
3) Vod measured with 100 ohm resistor between the true output and the complementary output.
4) Duty Cycle measured at 50% of output swing.
Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation