FSLD52TE Datasheet, PDF (1/2 Pages) Connor-Winfield Corporation – SURFACE MOUNT 3.3V HCMOS CLOCK OSCILLATOR

THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX [phone].
PHONE [phone].
www.conwin.com
PRODUCT DATA
CRYSTAL CONTROLLED OSCILLATORS
SHEET
SURFACE MOUNT 3.3V HCMOS CLOCK OSCILLATOR
CW 0701
FSLD52TE
156.25M
ABSOLUTE MAXIMUM RATINGS
PARAMETER
Storage Temperature
Supply Voltage
Input Voltage
UNITS
(Vcc)
(Vc)
MINIMUM
-40
-0.5
-0.5
NOMINAL
-
-
-
MAXIMUM
85
7.0
7.0
UNITS
°C
Vdc
Vdc
TABLE 1.0
NOTE
FSLD52TE
DESCRIPTION
OPERATING SPECIFICATIONS
PARAMETER
Center Frequency
Total Frequency Tolerance
Operating Temperature Range
Supply Voltage
Supply Current 2 to 31.999 MHz
Jitter (BW=10Hz to 20MHz)
Jitter (BW=12kHz to 20MHz)
SSB Phase Noise at 10Hz offset
SSB Phase Noise at 100Hz offset
SSB Phase Noise at 1KHz offset
SSB Phase Noise at 10KHz offset
SSB Phase Noise at 100KHz offset
(Fo)
(Vcc)
(Icc)
MINIMUM
19.44
-50
0
3.0
-
-
-
-
-
-
-
-
NOMINAL
-
-
3.3
-
-
-
-75
-100
-125
-135
-140
MAXIMUM
167
50
70
3.6
50
5
1
-
-
-
-
-
UNITS
MHz
ppm
°C
Vdc
mA
pS rms
pS rms
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
TABLE 2.0
NOTE
1
The Connor-Winfield
FSLD52TE is a surface mount
3.3V fixed frequency Crystal
Controlled Oscillator (XO) with
an HCMOS Tri-State output.
The FSLD52TE is designed for
applications requiring low jitter
and tight frequency stability.
INPUT CHARACTERISTICS
PARAMETER
Enable Voltage
Disable Voltage
(Vih)
(Vil)
MINIMUM
2.0
-
NOMINAL
-
-
MAXIMUM
-
0.5
UNITS
Vdc
Vdc
TABLE 3.0
NOTE
2
2
HCMOS OUTPUT CHARACTERISTICS
PARAMETER
LOAD
Voltage
(High)
(Voh)
(Low)
(Vol)
Current
(High)
(Ioh)
(Low)
(Ioh)
Duty Cycle at 50% of Vcc
Rise / Fall Time 10% to 90%
Start Up Time
MINIMUM
-
Vcc-0.5V
-
-24
-
45
-
-
NOMINAL
-
-
-
-
-
50
-
-
MAXIMUM
50
-
0.4
-
24
55
1.5
10
UNITS
pF
Vdc
Vdc
mA
mA
%
nS
mS
TABLE 4.0
NOTE
FEATURES
3.3V OPERATION
OVERALL FREQUENCY TOLERANCE:
±50ppm
TEMPERATURE RANGE: 0°C to 70°C
LOW JITTER <1pS RMS
TRI-STATE ENABLE/DISABLE
FUNCTION
SURFACE MOUNT PACKAGE
TAPE AND REEL PACKAGING
PACKAGE CHARACTERISTICS
Package
TABLE 5.0
Non-hermetic package consisting of an FR4 subs trate with grounded metal
cover.
PROCESS RECOMMENDATIONS
Solder Reflow
Wash
TABLE 6.0
The component solder used internal to this device has a melting point of
221°C. The peak temperature inside the device should be less than or
equal to 220°C for a maximum of 10 seconds
Ultrasonic cleaning is not recommended.
Notes
1.0
2.0
Inclusive of calibration frequency at 25°C, frequency vs. temperature stability, supply voltage c hange, load change, shock
and vibration and aging for ten years.
Oscillator output is enabled with no connection on pad 1
ORDERING INFORMATION
FSLD52TE - 156.25 MHz
CLOCK
SERIES
CENTER
FREQUENCY
DATASHEET #: ^Hc198 PAGE 1 OF 2
REV: 00
DATE: ^8/13/03
Specifications subject to change without notice.
aCopyright 2001 Connor-Winfield all rights reserved.