FPLD54TBX4 Datasheet, PDF (1/2 Pages) Connor-Winfield Corporation – 3.3V SURFACE MOUNT LVPECL CLOCK

THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX [phone].
PHONE [phone].
WWW.CONWIN.COM
PRODUCT
D ATA
SHEET
CRYSTAL CONTROLLED OSCILLATORS
3.3V SURFACE MOUNT LVPECL CLOCK
CW 0715
FPLD54TBX4
466.56M
ABSOLUTE M AXIMUM RATING S
PARAMETER
Storage Temperature
Supply Voltage
Input Voltage
UNITS
(Vcc)
MINIMUM
-40
-0.5
-0.5
NOMINAL
-
-
-
MAXIMUM
85
7.0
Vcc+0.5
UNITS
°C
Vdc
Vdc
TABLE 1.0
NOTE
OPERATING SPECIFIC ATIONS
PARAMETER
Center Frequency
Total Frequency Tolerance
Operating Temperature Range
Supply Voltage
Supply Current
Jitter (BW=10Hz to 20MHz)
Jitter (BW=12kHz to 20MHz)
SSB Phase Noise at 10Hz offset
SSB Phase Noise at 100Hz offset
SSB Phase Noise at 1KHz offset
SSB Phase Noise at 10KHz offset
SSB Phase Noise at 100KHz offset
(Fo)
(Vcc)
(Icc)
MINIMUM
200
-20
0
3.135
-
-
-
-
-
-
-
-
NOMINAL
-
-
3.3
-
-
-
-75
-95
-110
-125
-120
MAXIMUM
800
20
70
3.465
80
10
2
-
-
-
-
-
UNITS
MHz
ppm
°C
Vdc
mA
pS RMS
pS RMS
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
TABLE 2.0
NOTE
1
FPLD54TBX4
DESCRIPTION
The Connor-Winfield
FPLD54TBX4 is a fixed
frequency, surface mount Crystal
Controlled Oscillator (XO)
designed for applications
requiring low jitter and a ±20ppm
overall stability. Operating at 3.3V
supply voltage, the FPLD54TBX4
provides LVPECL Differential
Outputs with Enable/Disable
function.
FEATURES
INPUT CHARACTERISTICS
PARAMETER
Disable Input Voltage (High)
Enable Input Voltage (Low)
(Vih)
(Vil)
MINIMUM
2.275
-
NOMINAL MAXIMUM
-
-
-
1.68
UNITS
Vdc
Vdc
TABLE 3.0
NOTE
2
2
LVPECL OUTPUT CHARACTERISTICS
PARAMETER
LOAD
Voltage
(High)
(Voh)
(Low)
(Vol)
Duty Cycle
Rise / Fall Time 20% to 80%
MINIMUM
-
2.275
-
45
-
NOMINAL
-
-
-
50
0.5
MAXIMUM
50
-
1.68
55
1
UNITS
Ohms
Vdc
Vdc
%
nS
TABLE 4.0
NOTE
3
4
3.3V OPERATION
LVPECL DIFFERENTIAL OUTPUTS
DISABLE FUNCTION PAD 2
LOW JITTER <2pS RMS
OVERALL FREQUENCY TOLERANCE:
±20ppm
TEMPERATURE RANGE: 0 to 70°C
SURFACE MOUNT PACKAGE
PACKAG E CHARACTERISTICS
Package
TABLE 5.0
Non-hermetic package consisting of an FR4 substrate with grounded metal
cover.
TAPE AND REEL PACKAGING
RoHS 5/6 COMPLIANT
PROCESS RECOMMENDATIONS
Soldering Process
Wash
See solder profile page 2.
Ultrasonic cleaning is not recommended.
TABLE 6.0
Notes
1) Includes initial tolerance, deviation over temperature, supply and load variations, shock, vibration and 20 years
aging.
2) When the oscillator is disabled, the true output and the complementary output are in the high impedance state.
3) Output must be terminated into 50 ohms to Vcc – 2V or Thevenin equivalent.
4) Duty Cycle measured at 1.977V
DATASHEET #: ^Ec204 PAGE 1 OF 2
REV: 01
DATE: ^04/11/07
ORDERING INFORMATION
FPLD54TBX4 - 466.56M
LVPECL
CLOCK
SERIES
CENTER
FREQUENCY
Specifications subject to change without notice.
aCopyright 2001 Connor-Winfield all rights reserved.