FPLD54PTE-001.0G Datasheet, PDF (1/2 Pages) Connor-Winfield Corporation – High Frequency 9x14mm Surface Mount LVPECL Clock

2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: [phone]
Fax: [phone]
www.conwin.com
US Headquarters
630-851-4722:
European Headquarters:
[phone]
Bulletin
Page
Revision
Date
Ec261
1 of 2
00
03 Jun 2008
High Frequency
9x14mm Surface Mount
LVPECL Clock
Description
The Connor-Winfield
FPLD54PTE is a fixed
FPLD5048P2TE8
1.0 _GHZ
frequency, surface mount
Crystal Controlled Oscillator
(XO) designed for applications requiring
low jitter and a ±20ppm overall frequency
stability. Operating at 3.3V supply
voltage, the FPLD54PTE provides
LVPECL Differential Outputs with
Enable/Disable function.
Specifications
Features:
Model: FPLD54PTE
Frequency Range: 0.9 to 1.1 GHz
3.3V Operation
LVPECL Outputs
Frequency Stability: +/-20ppm
Temperature Range: 0 to 70°C
Low Jitter: <1.0ps
Surface Mount Package
Tape and Reel Packaging
RoHS Compliant / Lead Free
Absolute Maximum Ratings
Parameter
Storage Temperature
Supply Voltage
Input Voltage
Units
(Vcc)
(Vcc)
Minimum
-55
-0.5
-0.5
Nominal
-
-
-
Maximum
125
4.6
Vcc+0.5
Units
°C
Vdc
Vdc
Note
Operating Specifications
Parameter
Center Frequency
Total Frequency Tolerance
Operating Temperature Range
Supply Voltage
Supply Current
Period Jitter
Phase Jitter (BW=12kHz to 20MHz)
SSB Phase Noise at 10Hz offset
SSB Phase Noise at 100Hz offset
SSB Phase Noise at 1KHz offset
SSB Phase Noise at 10KHz offset
SSB Phase Noise at 100KHz offset
Input Characteristics
Parameter
Disable Input Voltage (Low)
Enable Input Voltage (High)
(Fo)
(Vcc)
(Icc)
Minimum
0.9
-20
0
3.135
-
-
-
-
-
-
-
-
Nominal
1.0
-
-
3.3
60
-
-
-50
-80
-100
-105
-110
Maximum
1.1
20
70
3.465
90
20
0.6
-
-
-
-
-
Units
GHz
ppm
°C
Vdc
mA
ps rms
ps rms
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
(Vil)
(Vih)
Minimum
-
2.0
Nominal
-
-
Maximum
0.8
-
Units
Vdc
Vdc
Note
1
Note
2
2
LVPECL Output Characteristics
Parameter
LOAD
Voltage
(High)
(Low)
Output Voltage (peak –peak level)
Duty Cycle
Rise / Fall Time 20% to 80%
Start up Time
(Voh)
(Vol)
Minimum
-
2.12
-
0.405
45
-
-
Nominal
-
-
-
-
50
-
-
Maximum
50
-
1.99
1.076
55
0.4
5
Units
Ohms
Vdc
Vdc
V
%
ns
ms
Note
3
4
5
Package Characteristics
Package
Non-Hermetical package consisting of an FR4 substrate with grounded metal
cover.
Process Recommendations
Soldering Process
RoHS compliant, lead free. See solder profile on page 2.
Wash
Ultrasonic cleaning is not recommended.
Notes
1) Includes calibration @ 25°C, frequency stability vs. temperature, supply and load variations, shock, vibration and 20
years aging.
2) When the oscillator is disabled, the outputs are at High Impedance. Output is enabled with no connection on pad 1.
3) Output must be terminated into 50 ohms to Vcc – 2V or Thevenin equivalent.
4) Duty Cycle measured at 50% of output swing.
5) Rise and fall times measured 20% to 80% of the total output voltage swing.
Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation