FPLA554G Datasheet, PDF (1/2 Pages) Connor-Winfield Corporation – SURFACE MOUNT 3.3V LVPECL CLOCK

THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX [phone].
PHONE [phone].
WWW.CONWIN.COM
PRODUCT
D AT A
SHEET
CRYSTAL CONTROLLED OSCILLATORS
SURFACE MOUNT 3.3V LVPECL CLOCK
ABSOLUTE M AXIMUM RATING S
PARAMETER
Storage Temperature
Supply Voltage
UNITS
(Vcc)
MINIMUM
-40
-0.5
NOMINAL
-
-
MAXIMUM
85
7.0
UNITS
°C
Vdc
TABLE 1.0
NOTE
OPERATING SPECIFIC ATIONS
PARAMETER
Center Frequency
Total Frequency Tolerance
Operating Temperature Range
Supply Voltage
Supply Current
Jitter (BW=10Hz to 20MHz)
Jitter (BW=12kHz to 20MHz)
SSB Phase Noise at 10Hz offset
SSB Phase Noise at 100Hz offset
SSB Phase Noise at 1KHz offset
SSB Phase Noise at 10KHz offset
SSB Phase Noise at 10KHz offset
(Fo)
(Vcc)
(Icc)
MINIMUM
44.736
-15
0
3.135
-
-
-
-
-
-
-
-
NOMINAL
-
-
3.3
-
-
-
-60
-90
-100
-125
-135
MAXIMUM
200
15
70
3.465
60
5
1
-
-
-
-
-
UNITS
MHz
ppm
°C
Vdc
mA
pS RMS
pS RMS
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
TABLE 2.0
NOTE
1
INPUT CHARACTERISTICS
PARAMETER
Disable Input Voltage (High)
Enable Input Voltage (Low)
(Vih)
(Vil)
PECL OUTPUT CHARACTERISTICS
PARAMETER
LOAD
Voltage
(High)
(Voh)
(Low)
(Vol)
Duty Cycle
Rise / Fall Time 20% to 80%
MINIMUM
2.275
-
NOMINAL
-
-
MAXIMUM
-
1.68
UNITS
Vdc
Vdc
TABLE 3.0
NOTE
2
2
MINIMUM
-
2.275
-
45
-
NOMINAL
-
-
-
50
-
MAXIMUM
50
-
1.68
55
1
UNITS
Ohms
Vdc
Vdc
%
nS
TABLE 4.0
NOTE
3
4
PACKAG E CHARACTERISTICS
Package
TABLE 5.0
Non-hermetic package consisting of an FR4 substrate with grounded metal
cover.
PROCESS RECOMMENDATIONS
TABLE 6.0
Solder Reflow
The component solder used internal to this device has a melting point of
221°C. The peak temperature inside the device should be less than or equal
to 220°C for a maximum of 10 seconds
Wash
Ultrasonic cleaning is not recommended.
Notes
1) Includes initial tolerance, deviation over temperature, supply and load variations, shock, vibration and 10 years
aging.
2) When the oscillator is disabled, the true output is in a low state (Vol) and the complementary output is in the high
state (VoH).
3) Output must be terminated into 50 ohms to Vcc – 2V or Thevenin equivalent.
4) Duty Cycle measured at 1.977V
FPLA554G
DESCRIPTION
The Connor-Winfield FPLA554G
is a fixed frequency, surface
mount Crystal Controlled
Oscillator (XO) designed for
applications requiring low jitter
and a ±15ppm overall stability.
Operating at 3.3V supply voltage,
the FPLA554G provides LVPECL
Differential Outputs with
enable/disable function.
FEATURES
3.3V OPERATION
ENABLE/DISABLE FUNCTION
LVPECL DIFFERENTIAL OUTPUTS
LOW JITTER <1pS RMS
OVERALL FREQUENCY TOLERANCE:
±15PPM
TEMPERATURE RANGE: 0 to 70°C
SURFACE MOUNT PACKAGE
TAPE AND REEL PACKAGING
RoHS COMPLIANT
ORDERING INFORMATION
FPLA554G - 155.52MHz
CLOCK
SERIES
CENTER
FREQUENCY
DATASHEET #: ^Ec223 PAGE 1 OF 2
REV: 00
DATE: ^01/12/06
Specifications subject to change without notice.
aCopyright 2001 Connor-Winfield all rights reserved.