D75J-038.88M Datasheet, PDF (1/2 Pages) Connor-Winfield Corporation – 5x7mm Surface Mount High Precision TCXO

2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: [phone]
Fax: [phone]
www.conwin.com
US Headquarters
630-851-4722:
European Headquarters:
[phone]
Bulletin
Page
Revision
Date
Tx238
1 of 2
01
14 Nov 2008
5x7mm Surface Mount
High Precision
TCXO
In Stock at Digi-Key
Description
Features
The Connor-Winfield’s D75J -
Series are 5x7mm Surface
Mount Temperature
3D8.7858JM0H8z47
Compensated Crystal
Controlled Oscillators (TCXO)
with a Tri-State LVCMOS output.
Through the use of Analog
Temperature Compensation, the
D75J - Series are capable of holding
sub 1-ppm stabilities over the 0 to
70°C temperature range.
Model D75J
TCXO
3.3V Operation
LVCMOS Output Logic
Frequency Stability: ±1.0ppm
Temperature Range: 0 to 70°C
Low Jitter <1pS RMS
Tri-State Enable/Disable Function
5x7mm Surface Mount Package
Tape and Reel Packaging
RoHS Compliant / Lead Free
Description
Absolute Maximum Ratings
Parameter
Storage Temperature
Supply Voltage
(Vcc)
Minimum
-55
-0.5
Nominal
-
-
Maximum
85
6.0
Input Voltage
-0.5
-
Vcc+0.5
Operating Specifications
Parameter
Frequencies Available
Frequency Calibration @ 25 C
Frequency Stability [±(Fmax – Fmin)/2.Fo]
Minimum Nominal Maximum
(Fo)
38.88, 50.0
-1.0
-
1.0
-1.0
-
1.0
Supply Voltage Variation (Vcc ±5%)
Load Coefficient (±5%)
Static Temperature Hysteresis
Aging
Temperature Range
Supply Voltage
Supply Current
Period Jitter
Phase Jitter (BW=12kHz to 20MHz)
SSB Phase Noise at 10Hz offset
SSB Phase Noise at 100Hz offset
SSB Phase Noise at 1KHz offset
(Vcc)
(Icc)
-0.2
-0.2
-
-1.0
0
3.135
-
-
-
-
-
-
-
-
-
-
-
3.3
-
3
0.5
-70
-100
-120
0.2
0.2
0.4
1.0
70
3.465
6
5
1
SSB Phase Noise at 10KHz offset
SSB Phase Noise at >100KHz offset
-
-140
-
-145
Input Characteristics For Enable / Disable Function (Pin 8)
Parameter
Enable Voltage (High) or open circuit
(Vih)
Minimum
70% Vcc
Nominal
-
Maximum
-
Disable Voltage (Low) Output Tri-stated
(Vil)
-
-
30% Vcc
LVCMOS Output Characteristics
Parameter
LOAD
Voltage
Current
(High)
(Low)
(High)
(Voh)
(Vol)
(Ioh)
Minimum
-
90%Vcc
-
-4
Nominal
15
-
-
-
Maximum
-
-
10%Vcc
-
(Low)
Duty Cycle at 50% of Vcc
Rise / Fall Time 10% to 90%
(Iol)
-
-
4
45
50
55
-
-
8
Units
°C
Vdc
Vdc
Units
MHz
ppm
ppm
ppm
ppm
ppm
ppm/year
C
Vdc
mA
ps rms
ps rms
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
Units
Vdc
Vdc
Units
pF
Vdc
Vdc
mA
mA
%
ns
Note
Note
1
2
3
Note
4
Note
5
Note:
1)
2)
3)
4)
5)
Initial calibration @ 25 C. Specifications at time of shipment after 48 hours of operation
Frequency stability vs. change in temperature.
Frequency change after reciprocal temperature ramped over the operating range. Frequency measured before and after at 25°C.
Leave Pad 8 unconnected if enable / disable function is not required. When tri-stated, the output stage is disabled but the oscillator and
compensation circuit are still active (current consumption < 1 mA).
or best performance it is recommended that the circuit connected to this output should have an equivalent input capacitance of 15pF.
Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation