D53G-020M Datasheet, PDF (1/3 Pages) Connor-Winfield Corporation – Precision 5.0x 3.2mm TCXO Model D53G

Available at Digi-Key
www.digikey.com
Precision
5.0x 3.2mm TCXO
Model D53G
2111 Co2m111prCeohmenpsrievheeDnrsiivvee _Drive
AuroraA, _{uIlrlionroai,sIll6in0o50is5 60505}
Phone:P6h3o0n-e8:5613-04-782521- ₄₇₂₂
Fax: 63F0a-x8:5613-05-084501- ₅₀₄₀
www.wcownww.icno.cnowmin.com
US Headquarters:
630-851-4722
European Headquarters:
[phone]
Bulletin
Page
Revision
Date
TX239
1 of 3
04
25 June 2015
Description:
Features:
The Connor-Winfield D53G is a 3.3V
Clipped Sinewave, Surface Mount,
Temperature Compensated Crystal
Oscillator (TCXO) designed for applications
requiring tight frequency stability. The
RoHS compliant surface mount package is
designed for high-density mounting and is
optimum for mass production.
D265.30GM1H5Z26
• 3.3 Vdc Operation
• Clipped Sinewave Output
• Frequency Stability: ±0.50 ppm
• Temperature Range: -30 to 85°C
• Low Jitter <1ps RMS
• 5.0x3.2mm SMT Package
• Tape and Reel Packaging
• RoHS Compliant, Lead Free
Absolute Maximum Ratings
Parameter
Storage Temperature
Supply Voltage (Vcc)
Minimum
-55
-0.5
Nominal
-
-
Maximum
85
Vcc+0.5
Units
°C
Vdc
Notes
Operating Specifications
Parameter Minimum Nominal Maximum Units Notes
Center Frequency (Fo)
-
20.0 or 26.0
-
MHz
Freq. Stability vs. Cal. @ 25°C
-1.0
-
1.0
ppm 1
Freq. Stability vs. Temp.
-0.50
-
0.50
ppm 2
Freq. Stability vs. Voltage
-0.25
-
0.25
ppm ±5%
Freq. Stability vs. Load
-0.25
-
0.25
ppm ±5%
Static Temperature Hysteresis
-
-
0.40
ppm 3
Freq. shift after reflow soldering -1.0
-
1.0
ppm 4
Aging
-1.0
-
1.0
ppm/year
Operating Temperature Range:
-30
-
85
°C
Supply Voltage (Vcc)
3.135
3.3
3.465
Vdc ±5%
Supply Current (Icc)
-
-
2
mA
Period Jitter
-
3
5
ps rms
Integrated Phase Jitter
-
SSB Phase Noise Fo =20 MHz
10Hz offset
-
100Hz offset
-
1KHz offset
-
10KHz offset
-
100KHz offset
-
Start-up Time
-
0.5
-80
-110
-130
-145
-150
-
1.0
ps rms 5
-
-
-
-
-
5
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
ms
Clipped Sinewave Output Characteristics
Parameter
Output Voltage
Load Resistance
Load Capacitance
Minimum
1.0
-
-
Nominal
-
10K
10
Maximum
-
-
-
Units Notes
V pk-pk 6
Ohm
pF 7
Package Characteristics
Package
Hermetically sealed ceramic package and metal cover
Environmental Characteristics
Vibration:
Shock:
Soldering Process;
Vibration per Mil Std 883E Method 2007.3 Test Condition A
Mechanical Shock per Mil Std 883E Method 2002.4 Test Condition B.
RoHS compliant lead free. See soldering profile on page 2.
Ordering Information
D53G-020.0M* or D53G-026.0M*
* For the tape and reel option, add -T to the end of the part number. Example: D53G-020.0M-T
Notes:
1. Frequency Calibration; frequency measured at Vcc = 3.3 Vdc, 25°C, referenced to Fo.
2. Frequency stability vs. change in temperature. [±(Fmax - Fmin)/2.Fo].
3. Frequency change after reciprocal temperature ramped over the operating range. Frequency measured before and after at 25°C.
4. Within two hours after reflow soldering
5. BW=12K Hz to 20 MHz.
6. Output is DC coupled
7. For best performance it is recommended that the circuit connected to this output should have an equivalent input capacitance of 10 pF.