D32G-016M Datasheet, PDF (1/2 Pages) Connor-Winfield Corporation – 3.2 x 2.5 mm Precision TCXO Model D32G

Available at Digi-Key
www.digikey.com
3.2 x 2.5 mm
Precision TCXO
Model D32G
2111 Co2m111prCeohmenpsrievheeDnrsiivvee _Drive
AuroraA, _{uIlrlionroai,sIll6in0o50is5 60505}
Phone:P6h3o0n-e8:5613-04-782521- ₄₇₂₂
Fax: 63F0a-x8:5613-05-084501- ₅₀₄₀
www.wcownww.icno.cnowmin.com
US Headquarters:
630-851-4722
European Headquarters:
[phone]
Bulletin
Page
Revision
Date
TX240
1 of 2
06
09 Oct 2012
Description:
The Connor-Winfield D32G is a 3.2
x 2.5 mm, 3.3 V Clipped Sinewave,
Surface Mount, Temperature
Compensated Crystal Oscillator
(TCXO) designed for applications
requiring tight frequency stability in
a very small package. The RoHS
compliant surface mount package is
designed for high-density mounting and
is optimum for mass production.
Features:
• 3.3 Vdc Operation
• Clipped Sinewave Output
• Frequency Stability: ±0.50 ppm
• Temperature Range: -30 to 85°C
• Low Jitter: < 1 ps RMS
• 3.2 x 2.5 mm SMT Package
• Tape and Reel Packaging
• RoHS Compliant / Lead Free
Parameter
Storage Temperature
Supply Voltage (Vcc)
Absolute Maximum Ratings
Minimum Nominal Maximum
-55
-
85
-0.5
-
6.0
Units
°C
Vdc
Notes
Operating Specifications
Parameter Minimum Nominal Maximum
Center Frequency: (Fo) 16.368, 19.2, 26.0 or 32.736
Frequency Calibration @ 25 °C
-1.0
-
1.0
Frequency Stability
Vs. Temperature:
-0.50
-
0.50
VS. Supply Voltage:
-0.025
-
0.025
VS. Load:
-0.025
-
0.025
Static Temperature Hysteresis:
-
-
0.40
Aging per Year
-1.0
-
1.0
Freq. Shift Due to Solder Reflow: -1.0
-
1.0
Operating Temperature Range:
-30
-
85
Supply Voltage (Vcc) ±5%
3.135
3.3
3.465
Supply Current (Icc)
-
-
2.0
Period Jitter
-
3
5
Integrated Phase Jitter
-
SSB Phase Noise at 10Hz offset
-
SSB Phase Noise at 100Hz offset -
SSB Phase Noise at 1KHz offset
-
SSB Phase Noise at 10KHz offset -
SSB Phase Noise at 100KHz offset -
Start-up Time-
-
0.5
-80
-110
-130
-145
-145
-
1.0
-
-
-
-
-
5
Units Notes
MHz
ppm 1
ppm 2
ppm ±5%
ppm ±5%
ppm Absolute, 3
ppm
ppm 4
°C
Vdc
mA
ps rms
ps rms 5
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
ms
Clipped Sinewave Output Characteristics
Parameter
Minimum Nominal Maximum Units Notes
Load (CL) - 10 pF // 10 KOhm 6
Output Voltage (High)
1.0
-
- V pk to pk 7
Package Characteristics
Package
Hermetically sealed ceramic package and metal cover
Ordering Information
D32G-016.368M*, D32G-019.2M*, D32G-026.0M* or D32G-032.736M*
* For the tape and reel option, add -T to the end of the part number. Example: D32G-016.368M-T
Notes:
1. Initial calibration @ 25°C. Specifications at time of shipment after 48 hours of operation.
2. Frequency stability vs. change in temperature. [±(Fmax - Fmin)/2.Fo].
3. Frequency change after reciprocal temperature ramped over the operating range. Frequency measured before and after at 25°C.
4. Within two hours after reflow
5. BW = 12 KHz to 20 MHz.
6. Output is DC coupled. Load capacitor, load resistor, coupling capacitor and by pass capacitors are required components to
insure proper operation of this TCXO.
7. For best performance it is recommended that the circuit connected to this output should have an equivalent input capacitance
of 10pF.