CY74FCT2374T Datasheet, PDF (1/15 Pages) Texas Instruments – 8-Bit Registers

D Function and Pinout Compatible With FCT
and F Logic
D 25-Ω Output Series Resistors to Reduce
Transmission-Line Reflection Noise
D Reduced V_OH (Typically = 3.3 V) Version of
Equivalent FCT Functions
D Edge-Rate Control Circuitry for
Significantly Improved Noise
Characteristics
D I_off Supports Partial-Power-Down Mode
Operation
D Matched Rise and Fall Times
D Fully Compatible With TTL Input and
Output Logic Levels
D ESD Protection Exceeds JESD 22
– 2000-V Human-Body Model (A114-A)
– 200-V Machine Model (A115-A)
– 1000-V Charged-Device Model (C101)
D 3-State Outputs
D 12-mA Output Sink Current
15-mA Output Source Current
D Edge-Triggered D-Type Inputs
D 250-MHz Typical Switching Rate
CY74FCT2374T
8-BIT REGISTER
WITH 3-STATE OUTPUTS
SCCS040A – SEPTEMBER 1994 – REVISED OCTOBER 2001
SN74FCT2374T . . . Q OR SO PACKAGE
(TOP VIEW)
OE 1
O₀ 2
D₀ 3
D₁ 4
O₁ 5
O₂ 6
D₂ 7
D₃ 8
O₃ 9
GND ¹⁰
20 V_CC
19 O₇
18 D₇
17 D₆
16 O₆
15 O₅
14 D₅
13 D₄
12 O₄
11 _CP
description
The CY74FCT2374T is a high-speed, low-power, octal D-type flip-flop featuring separate D-type inputs for each
flip-flop. On-chip termination resistors at the outputs reduce system noise caused by reflections. The
CY74FCT2374T can replace the CY74FCT374T to reduce noise in an existing design. The device has 3-state
outputs for bus-oriented applications. A buffered clock (CP) and output-enable (OE) inputs are common to all
flip-flops. The flip-flops in the CY74FCT2374T store the state of their individual data (D) inputs that meet the
setup-time and hold-time requirements on the low-to-high CP transition. When OE is low, the contents of the
flip-flops are available at the outputs. When OE is high, the outputs are in the high-impedance state. The state
of OE does not affect the state of the flip-flops.
This device is fully specified for partial-power-down applications using I_off. The I_off circuitry disables the outputs,
preventing damaging current backflow through the device when it is powered down.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright  2001, Texas Instruments Incorporated
1