CX20632 Datasheet, PDF (1/2 Pages) Conexant Systems, Inc – Multiple input/output retaskable ports

CX20632 5.1 HD Audio Codec with 2W Class-D, Dual
Capless HP, Jack Retasking, and SPDIF In and Out
Features
‹ 3 pairs of independent DACs and 3
pairs of independent ADCs
‹ Sampling rates include 16-bit, 44.1
kHz to 24-bit, 192 kHz for DACs, and
from 16-bit, 44.1 kHz to 24-bit; 96 kHz
for ADCs.
‹ Integrated mono 2 WRMS class-D
amplifier
‹ Two capless headphone ports
eliminate BOM
‹ Multiple Line Outputs for 5.1 audio
‹ Hardware digital crossover for
subwoofer
‹ Multiple input/output retaskable ports
‹ Stereo Digital Microphone interface
‹ Integrated boost for all microphones
‹ Independent SPDIF input and output
‹ Integrated regulators maximize
performance
‹ Microphone Security Control
‹ Integrated headphone limiter (GS
Mark)
‹ D-Flex Power Management minimizes
power consumption
‹ Wake on PC BEEP
‹ PopShield eliminates pops and clicks
‹ Fidelity exceeds Microsoft WHCK
requirements
‹ Jack sense detects up to 8 jacks
‹ Digital Mixer
‹ Compliant with all Intel High Definition
Audio Specifications
‹ Selectable 1.5V/3.3 V link signaling
‹ Available in 48-QFN package
Overview
Conexant's CX20632 is a low-power, 102 dB SNR HD Audio codec with integrated mono
2-WRMS filterless Class D speaker amplifier using Spread Spectrum dispersion
technology to prevent EMI. Three independent pairs of DACs and three independent
pairs of ADCs support multi-Streaming and Real Time Communications applications and
enable 5.1 multi-channel audio. The audio fidelity of the device exceeds Microsoft
Premium Logo requirements.
Two ProCoustic capless headphone drivers deliver 31 mW per channel into 32 Ω loads
and eliminate external DC blocking capacitors. Built-in support for 4-conductor-type
headset combo jacks saves space and system BOM cost.
Multiple Line Outputs are available for driving external powered speakers for 5.1 audio
on 3 or 5 jacks or higher powered integrated speaker amplifiers. Multiple retaskable ports
are available, including Microphone/Line in, Microphone/Line In/Line Out, and Line In/
Line Out retasking. All output ports feature PopShield technology that eliminates pops
and clicks.
The codec features a stereo digital microphone interface that includes a hardware DC-
level filter to remove DC offset and provides the clock output. It also includes one SPDIF
output and one SPDIF Input both supporting sample rates up to 192 kHz, 16-24-bit
resolution. Multiple GPIO's are provided, including speaker mute and EAPD functions.
Hardware volume control support push button and rotary volume knobs.
Integrated 5 V to 3.3 V and 3.3 V to 1.8 V Low Dropout (LDO) regulators guarantee high
performance analog audio and clean power to internal digital blocks. Conexant's D-Flex
power management allows the system to exceed the power savings specified in the Intel
ECR 15B. The internal Wake-on-BEEP logic resumes the analog paths for the PC BEEP
to the output ports. Analog and Digital power rails can be dropped in S3/S4/S5 to
maximize power savings and EuP compliance.
Block Diagram
Software
‹ SmartAudio GUI
‹ Voice Processing Algorithms include
end-to-end Noise Reduction, multi-
band AEC, and Beam Forming
‹ 10 band Speaker EQ and DRC
‹ 3D Expander
‹ Third-party software support includes
Andrea, Creative Labs, Dolby,
Fortemedia, Waves MaxxAudio, SRS,
and DTS
‹ Supports 32-bit/64-bit Windows/Linux
Applications
‹ Desktop PCs
‹ Multi-channel Notebooks
‹ All In One PCs
‹ Embedded Audio
‹ Sound Bars
Part Number CX20632
Description 5.1 HD Audio Codec