15K1A304 Datasheet, PDF (2/2 Pages) CONEC Elektronische Bauelemente GmbH – D-SUB FEMALE HD

F
E
D
C
B
A
D
D
Solder Instruction
1. Cable should be prepared for soldering. The cable/wires must be pretinned.
2. Insert cable/wire into solder cup.
3. Operate the soldering iron at 350°C, 50 Watt max. and use a pencil tip.
4. Put tip to wire in solder cup.
5. After 1 second bring in solder.
6. Heat for 3 seconds longer. Do not heat contact more than 4 seconds in total.
7. Remove soldering iron.
8. Wait until solder gets rigid again.
9. Do not solder adjacent contacts consecutively,
alternate position within the connector to minimize heat build up.
C
C
RECOMMENDED PANEL CUT-OUT
i 0,26 A
42,5 `0,1
B
B
10° <sup>`1°</sup>
47,04 `0,1
B
i 0,26 B
A
APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL
CUSTOMER APPROVAL DATE:
A
NAME:
TITLE:
COMPANY NAME:
APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL
F
E
tolerance
date
drawn 17.10.08
appd. 23.10.08
norm
d-old
a Origin
rev. description date name
D
C
scale:
4:1
material:
see sheet 1
dim. in mm
A
name
title:
Petker
PANEL CUT-OUT
Fischer
D-SUB FEMALE HD 44pos. SOLDER CUP
with hexlocking screw
dwg no:
Inventor 10
DIN-
R
15K1A304
A3
sh: 2
part no: _{see sheet 1}
B
A