CPH38W23MARARK9X Datasheet, PDF (1/1 Pages) CONEC Elektronische Bauelemente GmbH – PLUG CONNECTOR 38pos.

H
F
G
F
E
91,2 max.
n1,6
n0,65
n1,6
85
E
Second Mate First Mate
Pos. 22, 25, 28 Last Mate Signal
n^{2,6 (9,3 deep)}
Marking on
opposite side
(see note 5)
D
5
8
7
4
1
C
3
6
9
2
10
NOTES:
1. MATERIALS AND FINISHES:
- INSULATOR: GLASS FILLED PLASTIC UL 94 V-0 RATED, GREY RAL 7035 b
- CONTACTS: COPPER ALLOY, PLATING: FLASH GOLD OVER NICKEL
2. ELECTRICAL CHARACTERISTICS:
CREEPING AND CLEARANCE DISTANCE; MINIMUM:
- CONTACT 38 TO CONTACT 37: 2,5 MM
- CONTACT 38 TO CONTACT 36: 3,2 MM
B
- CONTACT 37 TO CONTACT 36: 3,2 MM
- CONTACT 38 TO SIGNAL CONTACTS: 6,4 MM
- CONTACT 37 TO SIGNAL CONTACTS: 6,4 MM
- CONTACT 36 TO SIGNAL CONTACTS: 2,0 MM
CONTACT CURRENT RATING:
- POWER CONTACTS POS. 36-38: 40 AMPERES CONTINUOUS, ALL CONTACTS UNDER LOAD
- POWER CONTACTS POS. 1-20: 28 AMPERES CONTINUOUS, ALL CONTACTS UNDER LOAD
- SIGNAL CONTACTS: 5 AMPERES NOMINAL
INITIAL CONTACT RESISTANCE PER IEC 512-2, TEST 2b:
- POWER CONTACTS: 0,0007 OHM MAX.
- SIGNAL CONTACTS: 0,004 OHM MAX.
INSULATION RESISTANCE: 5 G OHM PER IEC 512-2, TEST 3a, METHOD A
3. WORKING TEMPERATURE: -55°C TO +125°C
A
4. ORDER OF CONTACT MATING:
1. MATE: POS. 36 / 2. MATE: POS. 37, 38 / LAST MATE: POS. 22, 25, 28
5. CONNECTOR IS PART MARKED: PART-NO. CONEC ABC
H
G
F
E
D
1
D
C
B
42,5 `0,05
37,25 `0,05
33 `0,05
28,75 `0,05
24,5 `0,05
20,25 `0,05
16 `0,05
42,5 `0,05
37,5 `0,05
32,5 `0,05
27,5 `0,05
11,75 `0,05
7,5 `0,05
3,25 `0,05
1 `0,05
A
F
E
4,25 `0,05
6,25 `0,05
8,25 `0,05
10,25 `0,05
12,25 `0,05
14,25 `0,05
16,25 `0,05
18,25 `0,05
20,25 `0,05
22,25 `0,05
D
C
PCB hole pattern
1 Fixing plate
10
3 Signal contact type 4 (Pos. 22,25,28)
9
5 Signal contact type 3 (Pos. 23,26,29,32,35)
8
5 Signal contact type 2 (Pos. 21,24,27,30,33)
7
B
2 Signal contact type 1 (Pos. 31,34)
6
2 Power contact type 4 (Pos. 36,38)
5
10 Power contact type 3 (Pos. 2,4,6,8,10,12,14,16,18,20)
4
1 Power contact type 2 (Pos. 37)
3
10 Power contact type 1 (Pos. 1,3,5,7,9,11,13,15,17,19)
2
1 Case 38pos. male angled inverted
1
quantity
part description
item dwg no. / norm
material
partlist
finish:
see notes
tolerance
scale:
ISO 2768-m
material:
dim. in mm
2:1
see notes
date
drawn 12.01.05
name
title:
Mankopf
PLUG CONNECTOR 38pos.
appd. 12.01.05 E. Mickenbecker
SOLDER PIN ANGLED, INVERTED
norm
CompactPCI
A
d-old
dwg no:
Inventor
DIN-
1x b Ä 2168 21.02.05 Mkf.
R
45K1A004
A2
sh: 1
rev. description date name
C
B
part no: _{CPH38W23MARARK9X}
A