15K1A308 Datasheet, PDF (1/2 Pages) CONEC Elektronische Bauelemente GmbH – D-SUB MALE

F
E
D
b
NOTES:
1. FOR WAVESOLDERING (SOLDER BATH TEMPERATURE 265°C FOR 8 SEC.
AND SOLDER PREHEAT 150°C FOR 180 SEC.)
2. IP RATING: IP 67
3. SEALED TO WITHSTAND PRESSURE UP TO 1,45 PSI
FOR 30 MINUTES
AFTER HIGH TEMPERATURE EXPOSURE
D 4. METALSHELL: ZINC DIE CAST;
min. 50µin NICKEL PLATING over COPPER
5. INSULATORS: PBT GF UL 94 V-0, BLACK
6. O-RING: SILICONE PER ASTM D2000 70 SHORE A
7. RUBBER GASKET: TPE
8. SEALING COMPOUND: EPOXY RESIN UL 94 V-0; BLACK
9. CONTACTS: COPPER ALLOY
PLATING (SEE PART NO):
o PLEASE ADD 1 for 30µin HARD GOLD over min. 50µin NICKEL
o PLEASE ADD 3 for 8µin HARD GOLD over min. 50µin NICKEL
10. REAR SPACER CLIPS: COPPER ALLOY;
min. 200µin TIN over 80µin NICKEL
PCB-HOLE: n3,1`0,1; PCB THICKNESS 1,6mm
11. HEXLOCKING SCREWS: STAINLESS STEEL
12. PCB-HOLE DRILLINGS and
RECOMMENDED PANEL CUT-OUT ON SHEET 2
13. RECOMMENDED TORQUE FOR MOUNTING SCREW
35Ncm (3.1 in.LB) / max.67Ncm (6 in.LB)
14. CONNECTOR IS PART MARKED: 15-00044o CONEC ABC
C
POS. 1
POS. 20
78
+0,3
-0
b
63,5 `0,13
55,32
+0,23
- 0,02
C
b
b
B
A
(5:1)
D
8,23
+0,25
-0
RUBBER GASKET
PLACED ON TOP SURFACE
OF MALE INSULATOR
C
B
O-RING
4-40 UNC
10°
n^{0,6 `0,05 (37x) b}
15-00044o CONEC ABC
SEE NOTE 14
SEALING
COMPOUND ^B
4-40 UNC
b
AT ALL TIMES WATER RESISTANT CONNECTORS NOT
IN USE SHOULD BE COVERED WITH A CONEC WATER
RESISTANT CAP OR WATER TIGHT HOOD.
SW 4,8
APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL
CUSTOMER APPROVAL DATE:
A
NAME:
TITLE:
COMPANY NAME:
APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL
F
E
tolerance
date
drawn 17.10.08
appd. 21.10.08
norm
d-old
6 x b Ä3435
a Origin
21.09.09 HS
rev. description date name
D
C
scale:
2:1 (5:1)
material:
see notes
dim. in mm
A
name
title:
Petker
D-SUB MALE
Fischer
37pos. SOLDER PIN STRAIGHT
with rear spacer clip and hexlocking screw
dwg no:
Inventor 10
DIN-
R
15K1A308
A3
sh: 1
part no:
B
15-00044o (see note 9)
A