15K1A267 Datasheet, PDF (1/2 Pages) CONEC Elektronische Bauelemente GmbH – D-SUB FEMALE HD

F
E
D
bc
NOTES:
1. FOR WAVESOLDERING (SOLDER BATH TEMPERATURE 265°C FOR 8 SEC.
AND SOLDER PREHEAT 150°C FOR 180 SEC.)
2. IP RATING: IP 67
3. SEALED TO WITHSTAND PRESSURE UP TO 1,45 PSI
FOR 30 MINUTES
AFTER HIGH TEMPERATURE EXPOSURE
D _{4. METALSHELL: ZINC DIE CAST;}
min. 50µin NICKEL PLATING over COPPER
5. INSULATORS: PBT GF UL 94 V-0, BLACK
6. O-RING: SILICONE PER ASTM D2000 70 SHORE A
7. SEALING COMPOUND: EPOXY RESIN UL 94 V-0; BLACK
8. CONTACTS: COPPER ALLOY
PLATING (SEE PART NO):
o PLEASE ADD 1 for 30µin HARD GOLD over min. 50µin NICKEL
o PLEASE ADD 3 for 8µin HARD GOLD over min. 50µin NICKEL
9. REAR SPACER CLIPS: COPPER ALLOY;
min. 200µin TIN over 80µin NICKEL
PCB-HOLE: n3,1`0,1; PCB THICKNES 1,6mm
10. HEXLOCKING SCREWS: STAINLESS STEEL
11. PCB-HOLE DRILLINGS and
RECOMMENDED PANEL CUT-OUT ON SHEET 2
12. RECOMMENDED TORQUE FOR MOUNTING SCREW
35Ncm (3.1 in.LB) / max.67Ncm (6 in.LB)
13. CONNECTOR IS PART MARKED: 15-00054o CONEC ABC
47,7
+0,3
-0
c
C
33,32
+0,13
- 0,12
24,79
+0
- 0,25
C
c
B
A
(5:1)
D
8
+0,02
- 0,23
C
B
O-RING
4-40 UNC
10°
n0,65 `0,05 (26X) ^c
15-00054o
CONEC ABC
SEE NOTE 13 b
SEALING
COMPOUND
B
4-40 UNC
SW 4,8
c
AT ALL TIMES WATER RESISTANT CONNECTORS NOT
IN USE SHOULD BE COVERED WITH A CONEC WATER
RESISTANT CAP OR WATER TIGHT HOOD.
APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL
CUSTOMER APPROVAL DATE:
A
NAME:
TITLE:
COMPANY NAME:
APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL
F
E
tolerance
date
drawn 09.09.08
appd. 15.09.08
norm
5 x c Ä 3435
3 x b Ä 3129
a Origin
25.09.09 HS d-old
26.09.08 HS
rev. description date name
D
C
scale:
2:1 (5:1)
material:
see notes
dim. in mm
A
name
title:
Schmidt
D-SUB FEMALE HD
Fischer
26pos. SOLDER PIN STRAIGHT
with rear spacer clip and hexlocking screw
dwg no:
Inventor 10
DIN-
R
15K1A267
A3
sh: 1
part no:
B
15-00054o (see note 8) b
A