15K1A256 Datasheet, PDF (1/2 Pages) CONEC Elektronische Bauelemente GmbH – D-SUB MALE 90° 15pos. SOLDER PIN ANGLED with metal bracket, hexlocking screw and snap

F
E
D
b
NOTES:
1. FOR WAVESOLDERING (SOLDER BATH TEMERATURE 265°C FOR 8 SEC.
AND SOLDER PREHEAT 150°C FOR 180 SEC.)
2. IP RATING: IP 67
3. SEALED TO WITHSTAND PRESSURE UP TO 1,45 PSI
FOR 30 MINUTES
AFTER HIGH TEMPERATURE EXPOSURE
D 4. METALSHELL:
ZINC DIE CAST; min. 50µin NICKEL PLATING over COPPER
5. INSULATORS: PBT GF UL 94 V-0, BLACK
6. O-RING: SILICONE PER ASTM D2000 70 SHORE A
7. RUBBER GASKET: TPE
8. SEALING COMPOUND: EPOXY RESIN UL 94 V-0; BLACK
9. CONTACTS: COPPER ALLOY
PLATING (SEE PART NO):
o PLEASE ADD 1 for 30µin HARD GOLD
over min. 50µin NICKEL
o PLEASE ADD 3 for 8µin HARD GOLD
over min. 50µin NICKEL
10. METAL BRACKETS: ZINC DIE CAST;
300µin COPPER/40-120µin NICKEL/120-200µin TIN
11. WASHERS: COPPER ALLOY; 80µin NICKEL
12. HEXLOCKING SCREWS: STAINLESS STEEL
13. PCB-SNAPS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL
PCB-HOLE: n3.1`0.1; PCB THICKNESS 1.6mm
14. P.C.B. HOLE DRILLINGS and
RECOMMENDED PANEL CUT-OUT ON SHEET 2
15. RECOMMENDED TORQUE FOR MOUNTING SCREW
35Ncm (3.1 in.LB) / max.67Ncm (6 in.LB)
16. CONNECTOR IS PART MARKED: 15-00074o CONEC ABC
C
47,7
+
-
0,3
0
d
POS. 1
POS. 9
33,32
+0,13
- 0,12
25,14
+0,23
- 0,02
C
d
d
B
4,85 `0,3
6,35 `0,3
A
D
(5:1)
8,23
+
-
0,25
0
C
RUBBER GASKET
PLACED ON TOP SURFACE
OF MALE INSULATOR
B
O-RING
4-40 UNC
10°
METAL BRACKET
15-00074o
CONEC ABC
PRESS FOR FIXING ON PCB
PCB SNAP
3,2 `0,2
B
SEALING
COMPOUND
SEE NOTE 16 ^b
d
4-40 UNC
AT ALL TIMES WATER RESISTANT CONNECTORS NOT
IN USE SHOULD BE COVERED WITH A CONEC WATER
RESISTANT CAP OR WATER TIGHT HOOD.
SW 4,8
APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL
CUSTOMER APPROVAL DATE:
A
NAME:
TITLE:
COMPANY NAME:
4 x d Ä 3435
3 x b Ä 3129
a Origin
tolerance
date
drawn 12.09.08
appd. 15.09.08
norm
02.10.09 HS d-old
26.09.08 Petker
scale:
2:1 (5:1)
material:
see notes
dim. in mm
A
name
title:
Schmidt
D-SUB MALE 90°
Fischer
15pos. SOLDER PIN ANGLED
with metal bracket, hexlocking screw and snap
dwg no:
Inventor 10
DIN-
R
15K1A256
A3
sh: 1
APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL
F
E
rev. description date name
D
C
part no:
B
15-00074o (see note 9) b
A