15K1A253 Datasheet, PDF (1/2 Pages) CONEC Elektronische Bauelemente GmbH – D-SUB FEMALE 90° 15pos. SOLDER PIN ANGLED with metal bracket, hexlocking screw and snap

F
E
D
b
NOTES:
1. FOR WAVESOLDERING (SOLDER BATH TEMPERATURE 265°C FOR 8 SEC.
AND SOLDER PREHEAT 150°C FOR 180 SEC.)
2. IP RATING: IP 67
3. SEALED TO WITHSTAND PRESSURE UP TO 1,45 PSI
FOR 30 MINUTES
AFTER HIGH TEMERATURE EXPOSURE
D 4. METALSHELL:
ZINC DIE CAST; min. 50µin NICKEL PLATING over COPPER
5. INSULATORS: PBT GF UL 94 V-0, BLACK
6. O-RING: SILICONE PER ASTM D2000 70 SHORE A
7. SEALING COMPOUND: EPOXY RESIN UL 94 V-0; BLACK
8. CONTACTS: COPPER ALLOY
PLATING (SEE PART NO):
o PLEASE ADD 1 for 30µin HARD GOLD
over min. 50µin NICKEL
o PLEASE ADD 3 for 8µin HARD GOLD
over min. 50µin NICKEL
9. METAL BRACKETS: ZINC DIE CAST;
300µin COPPER/40-120µin NICKEL/120-200µin TIN
10. WASHERS: COPPER ALLOY; 80µin NICKEL
11. HEXLOCKING SCREWS: STAINLESS STEEL
12. PCB-SNAPS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL
PCB-HOLE: n3.1`0.1; PCB THICKNESS 1.6mm
13. P.C.B. HOLE DRILLINGS and
RECOMMENDED PANEL CUT-OUT ON SHEET 2
14. RECOMMENDED TORQUE FOR MOUNTING SCREW
35Ncm (3.1 in.LB) / max.67Ncm (6 in.LB)
15. CONNECTOR IS PART MARKED: 15-00078o CONEC ABC
C
47,7
+0,3
-0
d
33,32
+0,13
- 0,12
24,79
+0,05
- 0,2
C
d
d
B
4,74 `0,3
6,35 `0,3
A
(5:1)
D
8
+0,02
- 0,23
C
B
O-RING
10°
METAL BRACKET
PRESS FOR FIXING ON PCB
15-00078o
CONEC ABC
PCB SNAP
3,2 `0,2
B
SEALING
COMPOUND
4-40 UNC
SEE NOTE 15 b
4-40 UNC
d
AT ALL TIMES WATER RESISTANT CONNECTORS NOT
IN USE SHOULD BE COVERED WITH A CONEC WATER
RESISTANT CAP OR WATER TIGHT HOOD.
SW 4,8
APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL
CUSTOMER APPROVAL DATE:
A
NAME:
TITLE:
COMPANY NAME:
APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL
F
E
tolerance
date
drawn 12.09.08
appd. 15.09.08
norm
4 x d Ä 3435
3 x b Ä 3129
a Origin
05.10.09 HS d-old
26.09.08 Petker
rev. description date name
D
C
scale:
2:1 (5:1)
material:
see notes
dim. in mm
A
name
title:
Schmidt
D-SUB FEMALE 90°
Fischer
15pos. SOLDER PIN ANGLED
with metal bracket, hexlocking screw and snap
dwg no:
Inventor 10
DIN-
R
15K1A253
A3
sh: 1
part no:
B
15-00078o (see note 8) b
A