TV06B5V0-G_12 Datasheet, PDF (1/7 Pages) Comchip Technology – SMD Transient Voltage Suppressor

SMD Transient Voltage Suppressor
TV06B5V0-G Thru. TV06B441-G
Working Peak Reverse voltage: 5.0 ~ 440Volts
Power Dissipation: 600 Watts
RoHS Device
Features
-Ideally for surface mount applications.
-Easy pick and place.
-Plastic package has Underwriters Lab.
flammability classification 94V-0.
-Typical IR less than 1μA above 10V.
-Fast response time: typically less than 1nS for
uni-direction, less than 5nS for bi-directional,
form 0V to BV min.
Mechanical Data
-Case: JEDEC DO-214AA molded plastic.
-Terminals: solderable per MIL-STD-750,
method 2026
-Polarity: Cathode band denoted.
-Weight: 0.093 gram approx.
SMB/DO-214AA
0.087(2.20)
0.077(1.96)
0.096(2.44)
0.083(2.13)
0.060(1.52)
0.030(0.75)
0.191(4.85)
0.171(4.35)
0.216(5.50)
0.201(5.10)
0.155(3.94)
0.130(3.30)
0.012(0.30)
0.006(0.15)
0.008(0.20)
0.001(0.02)
Dimensions in inches and (millimeter)
Maximum Ratings and Electrical Characteristics
Rating at 25 ^OC ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristics
Symbol
Value
Peak power dissipation on 10/1000μS
waveform (Note 1, Fig.1)
PPPM
600
Peak pulse current on 10/1000μS waveform
(Note 1, Fig.3)
Steady state power dissipation at TL=75 ^OC
(Note 2)
IPPM
PM(AV)
See Next Table
5.0
Peak forward surge current, 8.3mS single half
sine-wave superimposed on rated load, uni-
IFSM
100
directional only (Note 3)
Maximum instantaneous forward voltage at
35.0A for uni-directional only (Note 3, 4)
VF
3.5/5.0
Maximum operation junction temperature
TJ
150
Storage temperature range
TSTG
-55 to +150
Note:
1. Non-repetitive current pulse, per Fig. 5 and derated above TA=25 ^OC per Fig.1
2. Measured on 8.3 mS single half sine-wave or equivalent square wave, duty cycle=4 pulse per minute maximum.
3. VF<3.5V for devices of VBR <200V and VF <5.0V for devices of VBR >201V
QW-BTV02
Units
W
A
W
A
V
O_C
O_C
REV:C
Page 1