SB260E-G Datasheet, PDF (1/2 Pages) Comchip Technology – Low VF/ESD Leaded Schottky Barrier Rectifiers

Low VF/ESD Leaded Schottky Barrier Rectifiers
SB220E-G thru SB2100E-G
Voltage Range: 20 to 100 V
Current: 2.0 A
"-G" : RoHS Device
FEATURES
• Low drop down voltage
• 2.0A operation at TA=75°C with no thermal runaway
• For use in low voltage, high frequency invertors free
wheeling and polarity protection
• Silicon epitaxial planar chips
• Electrostatic discharge (ESD) test under IEC61000-4-2:
standard: >15KV (air) & 8KV (contact)
• Lead-free part, meet RoHS requirements
MECHANICAL DATA
DO - 1 5
.140(3.6)
.104(2.6)
1.0(25.4) Min.
.3 0 0 (7 .6 )
.2 3 0 (5 .8 )
• Case: Molded plastic body DO-15
• Epoxy: UL94-V0 rated flame retardant
• Terminals: Solderable per MIL-STD-750 Method 2026
• Polarity: Color band denotes cathode end
• Mounting Position: Any
• Weight: 0.015 ounces, 0.4 grams
.034(0.86)
.028(0.71)
1.0(25.4) Min.
Unit :inch(mm)
MAXIMUM RATING AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified
Symbols 220E 240E 245E 250E 260E 280E 2100E Units
Maximum Recurrent Peak Reverse Voltage
VRRM 20 40 45 50 60 80 100 Volts
Maximum RMS Voltage
VRMS 14 28 30 35 42 56 70 Volts
Maximum DC Blocking Voltage
VDC 20 40 45 50 60 80 100 Volts
Maximum Average Forward Rectified Current
0.375” (9.5mm) lead length at TA=75°C, See Figure 1
Peak Forward Surge Current
8.3mS single half sine-wave superimp osed on
rated load (JEDEC Me thod) TL=110°C
Maximum Forward Voltage at 2.0A (Note 1)
IAV
IFSM
VF
Maximum DC Reverse Current
at Rated DC Blocking Voltage
TA= 25°C
IR
TA=100°C
2.0
50
0.50
0.70
0.5
20
Amps
Amps
0.85 Volts
mA
10
Typical Junction Capacitance (Note 2)
CJ
170
pF
Typical Thermal Resistance (Note 3)
RθJA
RθJL
50.0
25.0
°C/W
Operating Junction Temperature Range
TJ
-65 ~ +125
-65 ~ +150 °C
Storage Temperature Range
TSTG
-65 ~ +150
°C
Note 1. Pulse test: 300µS pu lse wi dth, 1% du ty cy cle
2. Me asured at 1.0MH z an d ap plied reverse vo ltage of 4.0 Volts
3. Therma l resistance from junction to am bient and from junction to lead P.C.B. mo unted 0. 375” (9.5mm ) lead length
MDS0906003A
Page 1