SA5V0-HF Datasheet, PDF (1/6 Pages) Comchip Technology – Axial Lead Transient Voltage Suppressor

Axial Lead Transient Voltage Suppressor
SA5V0-HF Thru. SA191-HF Series
Working Peak Reverse Voltage: 5.0 to 190 Volts
Peak Pulse Power: 500 Watts
RoHS Device
Halogen Free
Features
-Glass passivated chip.
-Low leakage.
-500W peak pulse power capability with a
10/1000μs waveform, repetitive rate (duty
cycle): 0.01%.
-Uni and Bidirectional unit.
-Excellent clamping capability.
-Very fast response time.
-RoHS compliant.
Mechanical data
DO-15
1.000(25.40)
MIN.
0.033(0.84)
0.028(0.71)
0.300(7.63)
0.230(5.85)
1.000(25.40)
MIN.
0.142(3.61)
0.102(2.60)
-Case: Molded plastic DO-15
-Epoxy: UL 94V-0 rate flame retardant
-Terminals: Axial leads solderable per MIL-STD-202
Method 208
-Polarity: Color band denotes positive end
(cathode)
-Mounting position: Any
Dimensions in inches and (millimeter)
Maximum Ratings and Electrical Characteristics
Ratings at 25°C ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristics
Symbol
Value
Peak power dissipation with a 10/1000μS
PPP
waveform (Note 1)
Peak pulse current with a 10/1000μS
IPPM
waveform (Note 1)
Power dissipation on infinite heatsink at
PD
TL=75 °C
Peak forward surge current, 8.3ms single
half sine-wave uni-directional only (Note 2)
IFSM
500
See Next Table
3.0
70
Maximum instantaneous forward voltage
at 25A for uni-directional only (Note 3)
Operating junction and storage temperature
range
VF
TJ,TSTG
3.5/5.0
-55 to +150
NTOES:
(1) Non-repetitive current pulse per fig.5 and derated above TA=25°C per fig. 1.
(2) Measured on 8.3 ms single half sine-wave or equivalent square wave,duty cycle=4 pulses per minute maximum.
(3) VF<3.5V for devices of VBR<200V and VF<5.0V for devices of VBR>201V.
Company reserves the right to improve product design , functions and reliability without notice.
QW-JTV12
Comchip Technology CO., LTD.
Units
W
A
W
A
V
°C
REV:A
Page 1