P6KE-G Datasheet, PDF (1/5 Pages) Comchip Technology – 600W Transient Voltage Suppressor

600W Transient Voltage Suppressor
P6KE-G Series
Stand-off Voltage: 6.8 ~ 400V
Power Dissipation: 600 Watts
RoHS Device
SMD Diodes Specialist
Features
-Plastic package has underwriters laboratory
flammability classification 94V-0
-600W, surge capability at 1mS.
-Excellent clamping capability.
-Low Zener impedance.
-Fast response time: typically less than 1.0pS from
0 volt to BV min.
-Typical IR less than 1μA above 10V.
Mechanical Data
-Case: Molded plastic DO-15
-Terminals: Axial leads solderable per MIL-STD-
202, Method 208
-Polarity: Color band denotes positive end
(cathode)
-Weight: 0.4 gram (0.014oz.)
1.0(25.4)
MIN.
DO-15
0.034(0.9)
0.028(0.7)
0.300(7.6)
0.230(5.8)
1.0(25.4)
MIN.
0.140(3.6)
0.104(2.6)
Dimensions in inches and (millimeter)
Maximum Ratings and Electrical Characteristics
Parameter
Peak power dissipation at TA=25^OC
TP=1mS
(Note 1)
Steady state power dissipation at TL=75^OC
Lead length 0.375" (9.5mm) (Note 2)
Symbol
PPK
PD
Peak forward surge current, 8.3mS single
half sine-wave superimposed on rated load
(JEDEC method) (Note 3)
IFSM
Operating junction and storage temperature
range
TJ, TSTG
NTOES:
(1) Non-repetitive current pulse, per fig.3 and derated above TA=25^OC per fig. 2.
(2) Mounted on copper land area of 1.57in²(40mm²).
(3) 8.3mS single half-sine wave, duty cycle=4 pulses per minute maximum.
(4) For bidirectional use C suffix for 10% tolerance, CA suffix for 5% tolerance.
Value
600
5.0
100
-55 to +175
Unit
W
W
A
O_C
QW-BTV06
REV:A
Page 1