P4KE-G_12 Datasheet, PDF (1/6 Pages) Comchip Technology – 400W Transient Voltage Suppressor

400W Transient Voltage Suppressor
P4KE-G Series
Stand-off Voltage: 6.8 ~ 600V
Power Dissipation: 400 Watts
RoHS Device
Features
-Glass passivated chip
-Low leakage
-Uni and Bidirection unit
-Excellent clamping capability
-The plastic material has UL recognition 94V-0
-Fast response time: typically less than 1.0pS from
0 volts to BV min
Mechanical Data
-Case: Molded plastic DO-41
-Polarity: By cathode band denotes unidirectional
device none cathode band denoted bi-directional
device
-Weight: 0.34 grams
DO-41
1.000(25.40)
MIN.
0.033(0.84)
DIA.
0.028(0.71)
0.205(5.21)
0.165(4.19)
1.000(25.40)
MIN.
0.117(2.97)
DIA.
0.090(2.29)
Dimensions in inches and (millimeter)
Maximum Ratings and Electrical Characteristics
Rating at 25°C ambient unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Parameter
Symbol
Value
Peak power dissipation a 10/1000μs waveform
PPP
400
(Note 1)
Peak pulse current with a 10/1000μs waveform
IPP
(Note 1)
O
Power dissipation on infinite heatsink at TL=75 C
PD
See Next Table
1.0
Peak forward surge current, 8.3mS single
half sine-wave unidirectional only(Note 2)
Maximum instantaneous forward voltage
at 25A for unidirectional only (Note 3)
Operating junction and storage temperature
range
IFSM
VF
TJ, TSTG
40
3.5/5.0
-55 to +150
NTOES:
(1) Non-repetitive current pulse, per fig.5 and derated above TA=25 ^OC per fig. 1.
(2) Measured on 8.3 ms single half sine-wave or equivalent square wave,duty cycle=4 pulses per minute maximum.
(3) VF<3.5V for devices of VBR<200V and VF<5.0V for devices of VBR>201V.
Unit
W
A
W
A
V
O_C
QW-BTV05
REV:B
Page 1