CGRA4001-HF Datasheet, PDF (1/4 Pages) Comchip Technology – SMD General Purpose Rectifiers

SMD General Purpose Rectifiers
CGRA4001-HF Thru. CGRA4007-HF
Reverse Voltage: 50 to 1000 Volts
Forward Current: 1.0 Amp
RoHS Device
Halogen Free
Features
- Ideal for surface mount applications.
- Low profile package.
- Built in strain relief.
- Easy pick and place.
- Plastic package has Underwriters Laboratory
flammability classification 94V-0.
- Low forward drop.
- Glass passivated dip junction.
- High temperature soldering:
260°C/10 seconds at terminals
Mechanical data
- Case: JEDEC DO-214AC, molded plastic.
- Terminals: Solder plated, Solderable per
MIL-STD-750, Method 2026.
- Polarity: Indicated by cathode band.
- Weight: 0.064 grams( Approx.).
DO-214AC (SMA)
0.062(1.60)
0.047(1.25)
0.181(4.60)
0.157(4.00)
0.114(2.90)
0.098(2.50)
0.096(2.44)
0.078(2.00)
0.060(1.52)
0.030(0.76)
0.208(5.28)
0.188(4.80)
0.012(0.305)
0.006(0.152)
0.008(0.203)
0.002(0.051)
Dimensions in inches and (millimeter)
Circuit diagram
Maximum Ratings and Electrical Characteristics
Ratings at 25°C ambient temperature unless otherwise specified. Single phase half wave,
60 Hz, resistive or inductive load. For capacitive load, derate current by 20%.
Parameter
Max. Recurrent peak reverse voltage
Symbol ^{CGRA CGRA CGRA CGRA CGRA CGRA CGRA} Units
4001-HF 4002-HF 4003-HF 4004-HF 4005-HF 4006-HF 4007-HF
VRRM
50
100
200
400
600
800 1000 V
Max. DC blocking voltage
VDC
50
100
200
400
600
800 1000 V
Max. RMS voltage
VRMS
35
Peak forward surge current 8.3ms
single half sine-wave superimposed
IFSM
on rate load (JEDEC method)
Max. average forward rectified current,
I(AV)
at TL=75°C
Max. instantaneous forward voltage at 1.0A VF
70
140
280
420
560
700
V
30
A
1.0
A
1.1
V
Max. DC reverse current at
TA=25°C
IR
rated DC blocking voltage
TA=125°C
IR
Max. Reverse recovery time (Note1)TJ=25°C Trr
5.0
μA
100
2.5
µs
Typical junction capacitance (Note 2)
CJ
2.5
pF
Max. Thermal resistance (Note 3)
RθJA
15.0
°C/W
Operating temperature range
TJ
-55 to +150
°C
Storage temperature range
TSTG
-55 to +150
°C
Notes: 1. Reverse recovery test condition: IF=0.5A, IR=1.0A, IRR=0.25A
2. Measured at 1MHz and applied VR=4.0 volts.
3. 8.0mm² (0.013mm thick) land areas.
Company reserves the right to improve product design , functions and reliability without notice.
QW-JG009
Comchip Technology CO., LTD.
REV:A
Page 1