5KP-G Datasheet, PDF (1/5 Pages) Comchip Technology – 5000W Transient Voltage Suppressor

5000W Transient Voltage Suppressor
5KP-G Series
Stand-off Voltage: 6.8V ~ 220V
Power Dissipation: 5000 Watts
RoHS Device
Features
-Glass passivated chip.
-Low leakage.
-Uni and Bidirection unit.
-Excellent clamping capability.
-The plastic material has UL recognition 94V-0.
-Fast response time.
Mechanical Data
-Case: Molded plastic R-6
-Polarity: By cathode band denotes uni-directional
device, none cathode band denotes bi-directional
device
-Weight: 2.1 grams
R-6
1.0(25.4)
MIN.
0.052(1.32)
DIA.
0.048(1.22)
0.360(9.14)
0.340(8.64)
1.0(25.4)
MIN.
0.360(9.14)
DIA.
0.340(8.64)
Dimensions in inches and (millimeter)
Maximum Ratings and Electrical Characteristics
Rating at 25°C ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive loaded.
For capacitive load, derated current by 20%.
Parameter
Symbol
Value
Peak power dissipation with a 10/1000μs
PPP
waveform (Note 1)
5000
Peak pulse current with a 10/1000μs waveform
IPP
(Note 1)
See Next Table
Power dissipation on infinite heatsink at TL=75°C
PD
8.0
Peak forward surge current, 8.3ms single
half sine-wave unidirectional only (Note 2)
IFSM
500
Maximum instantaneous forward voltage at
100A for uni-directional devices only (Note 3)
VF
3.5 / 5.0
Operating junction and storage temperature
range
TJ, TSTG
-55 to +150
NTOES:
O
(1) Non-repetitive current pulse, per fig.5 and derated above TA=25 C per fig. 1.
(2) Measured on 8.3 ms single half sine wave of equivalent square wave,duty cycle=4 pulses per minute maximum.
(3) VF<3.5V for devices of VBR<200V and VF<5.0V for devices of VBR>201V
Unit
W
W
W
A
V
O_C
QW-BTV08
REV:B
Page 1