|
1N5391-G Datasheet, PDF (1/2 Pages) Comchip Technology – Axial Silastic Guard Junction Standard Rectifier | |||
|
Axial Silastic Guard Junction Standard Rectifier
1N5391-G Thru. 1N5399-G
Voltage: 50 to 1000 Volts
Forward Current: 1.5 Amps
RoHS Device
Features
DO-15
-Low cost construction.
-Low forward voltage drop.
-Low reverse leakage.
-High forward surge current capability.
-High temperature soldering guarantee: 260°C/10
seconds, 0.375" (9.5mm) lead length at 5lbs
(2.3kg) tension.
Mechanical Data
-Case: transfer-molded plastic.
-Epoxy: UL94V-0 rate flame retardant.
-Lead: Plated axial lead, solderable per MIL-STD-
202E, method 208C.
-Polarity: Cathode indicated by polarity band.
-Mounting position: Any.
-Weight: 0.012 ounce, 0.33grams.
1.0(25.4)
MIN.
0.034(0.9)
DIA.
0.028(0.7)
0.300(7.6)
0.230(5.8)
1.0(25.4)
MIN.
0.140(3.6)
DIA.
0.104(2.6)
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Ratings at 25°C ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load derate current by 20%.
Parameter
Symbol 1N5391 1N5392 1N5393 1N5394 1N5395 1N5396 1N5397 1N5398 1N5399 Unit
-G
-G
-G
-G
-G
-G
-G
-G
-G
Max.repetitive peak reverse voltage
VRRM
50
100
200
300
400
500
600
800 1000
V
Max.RMS voltage
VRMS
35
70
140
210
280
350
420
560
700
V
Max.DC blocking voltage
VDC
50
100
200
300
400
500
600
800 1000
V
Max. average forward rectified
current , 0.375"(9.5mm) lead length at
I(AV)
1.5
A
TA=75 OC
Peak forward surge current, 8.3mS
single half sine wave superimpose on
IFSM
30
A
rated load (JEDEC method)
Max. instantaneous forward voltage
VF
1.1
V
at IF=1.0A
Max. DC reverse current at TA=25 OC
rated DC blocking voltage TA=100 OC
IR
5.0
μA
50
Max. full load reverse current, full
cycle average 0.375"(9.5mm) lead
IR(AV)
30
μA
length at TL=75 OC
Typical junction capacitance (Note 1)
Typical thermal resistance (Note 2)
Operating junction temperature range
Storage temperature range
CJ
RθJA
TJ
TSTG
13
50
-55 to +150
-55 to +150
pF
OC/W
OC
OC
Notes:
1. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
2. Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, P.C. board mounted with 0.2"Ã0.2" (5.0Ã
5.0mm) copper pads.
QW-BB021
Comchip Technology CO., LTD.
REV:A
Page 1
|
▷ |