1.5KE-G_12 Datasheet, PDF (1/6 Pages) Comchip Technology – 1500W Transient Voltage Suppressor

1500W Transient Voltage Suppressor
1.5KE-G Series
Stand-off Voltage: 6.8 ~ 600V
Power Dissipation: 1500 Watts
RoHS Device
Features
-Glass passivated chip.
-Low leakage.
-1500W peak pulse power capability with a 10/1000μs
waveform, repetitive rate (duty cycle): 0.01%.
-Uni and Bidirectional unit.
-Excellent clamping capability.
-Very fast response time.
Mechanical Data
-Case: Molded plastic DO-201
-Epoxy: UL 94V-0 rate flame retardant
-Terminals: Axial leads, solderable per
MIL-STD-202, Method 208 guranteed
-Polarity: Color band denotes cathode
end except Bipolar
-Mounting position: Any
-Approx. weight: 0.844 grams
DO-201
1.000(25.40) Min.
0.375(9.53)
0.285(7.24)
0.209(5.30) DIA.
0.189(4.79) DIA.
1.000(25.40) Min.
0.042(1.07) DIA.
0.038(0.97) DIA.
Dimensions in inches and (millimeter)
Maximum Ratings and Electrical Characteristics (TA=25°C unless otherwise noted)
Parameter
Peak power dissipation with a 10/1000μs
waveform (Note 1)
Peak pulse current with a 10/1000μs waveform
(Note 1)
Symbol
PPP
IPP
Power dissipation on infinite heatsink at TL=75°C
PD
Peak forward surge current, 8.3ms single
half sine-wave unidirectional only
IFSM
(JEDEC method) (Note 2)
Value
1500
See Next Table
6.5
200
Maximum instantaneous forward voltage at
100 A for unidirectional only(Note 3)
VF
3.5/5.0
Operating junction and storage
temperature range
TJ, TSTG
-55 to +150
NTOES:
(1) Non-repetitive current pulse, per fig.5 and derated above TA=25°C per fig.1
(2) Measured on 8.3ms single half sine-wave or equivalent square wave, equare wave, duty cycle=4 pulses per minute maximum
(3) VF<3.5V for devices of VBR<200V and VF<5.0V for devices of VBR>201V
QW-BTV07
Unit
W
A
W
A
V
°C
REV:B
Page 1