LPS4012 Datasheet, PDF (2/2 Pages) Coilcraft lnc. – Shielded Power Inductors

Document 433-2
Shielded SMT Power Inductors – LPS4012 Series
Typical L vs Frequency
Typical L vs Current
10000
1000
100
10
1
2200 µH
1000 µH
220 µH
100 µH
22 µH
10 µH
5.6 µH
2.2 µH
1 µH
10000
1000
100
10
1
2200 µH
1000 µH
220 µH
100 µH
22 µH
10 µH
5.6 µH
2.2 µH
1 µH
0.1
0.1
0.01
0.1
1
10
0.01
0.1
1
10
Frequency (MHz)
Current (A)
* 0.1535 ±0.003
3,90 ±0,076
XXX X
* 0.1535 ±0.003
3,90 ±0,076
Winding
direction
Dash Internal
number
code
0.0433 ±0.004*
1,10 ±0,10
Recommended
Land Pattern
0.105
2,66
0.059
1,50
0.110 0.045
2,79 1,15
0.0305
0,775
0.153
3,89
Packaging  1000/7″ reel; 3500/13″ reel  Plastic tape:  12 mm wide,
0.25 mm thick, 8 mm pocket spacing, 1.32 mm pocket depth
NOTE NEW PART ORIENTATION  Parts are rotated 90° in the
packaging tape compared to previous versions of this product.
NEW
OLD
123 123 123
Coilcraft Designer’s Kit C392 contains samples of 0.80 µH to 33 µH
parts (3 each) from LPS3008, LPS3010 and LPS3015. Kit C401 con-
tains samples of 0.56 µH to 33 µH parts (3 each) from LPS4012 and
LPS4018. Kit C402 contains samples of 220 µH to 3300 µH parts
(3 each) from all five series. For details of kit contents and to order,
contact Coilcraft or visit http://order.coilcraft.com.
0.060
1,52
* Dimensions are of the case not including
the termination. For maximum overall
dimensions including the termination, add
0.005 in / 0,13 mm.
For optional tin-lead and tin-silver-copper
terminations, dimensions are for the
mounted part. Dimensions before mounting
can be an additional 0.005 inch / 0,13 mm).
0.129
3,28
0.173
4,40
Dimensions are in
inches
mm
Document 433-2  Revised 08/01/13