LPR6235_13 Datasheet, PDF (2/2 Pages) Coilcraft lnc. – For Step-Up, Resonant & Flyback Applications

Document 752-2
Step-Up/Flyback Transformers – LPR6235
Dot indicates pin 1
1
4
0.236 ±0.003
6,00 ±0,08
L1
L2
XXXX
2
3
Dash
number
0.138
3,50
max
0.236 ±0.003
6,00 ±0,08
2
3
Recommended
Land Pattern
1
0.167 0.079
4,25 2,00
0.047
1,2
4 _45°
typ
0.260
6,60
1
4
0.060
1,52
Dimensions
are in
inches
mm
2
3
0.079
2,00
0.167
4,25
0.260
6,60
Core material Ferrite
Weight  460 – 480 mg
Terminations  RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Ambient temperature  –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature  Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Winding to winding isolation  300 Vrms
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Mean Time Between Failures (MTBF)  26,315,789 hours
Failures in Time (FIT)  38 per one billion hours
Packaging  350/7″ reel; 1500/13″ reel  Plastic tape:  16 mm wide,
0.3 mm thick, 12 mm pocket spacing, 3.68 mm pocket depth
Recommended pick and place nozzle  OD: 6.2 mm;  ID: ≤ 3.1 mm
PCB washing  Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
US [phone] [e-mail]
UK [phone] [e-mail]
Taiwan [phone] [e-mail]
China [phone] [e-mail]
Singapore + 65-6484 8412 [e-mail]
Document 752-2  Revised 09/24/13
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.