|
XPL2010-103MLB Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Power Inductors . XPL2010 Series | |||
|
Document 646-1
Power Inductors â XPL2010 Series
⢠Utra-miniature, magnetically shielded power inductors
⢠Very low DCR and excellent current handling.
⢠Soft saturation makes them ideal for VRM/VRD applications.
Designerâs Kit C428 contains 5 each of all values
Core materialâComposite
Core and winding lossâ See www.coilcraft.com/coreloss
Weightâ 20 mg
Environmentalâ RoHS compliant, halogen free
Terminationsâ RoHS compliant tin-silver-copper (96.5/3/0.5) over tin over
nickel over silver-platinum. Other terminations available at additional cost.
Ambient temperatureâ â40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperatureâ Component: â40°C to +125°C.
Tape and reel packaging: â40°C to +80°C
Resistance to soldering heatâ Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)â 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packagingâ 2000/7â³reel; 7500/13â³ reelâ Plastic tape:â 8 mm wide,
0.23 mm thick, 4 mm pocket spacing, 1.19 mm pocket depth
PCB washingâ Only pure water or alcohol recommended
â Inductance2
âDCR (Ohms)3
âSRF typ4
â Part number1
±20% (µH)
nomâââ max
(MHz)
10% drop
XPL2010-201ML_
0.20
0.024
0.027
408
2.80
XPL2010-331ML_
0.33
0.031
0.035
309
1.90
XPL2010-501ML_
0.50
0.040
0.045
218
1.80
XPL2010-681ML_
0.68
0.057
0.063
152
1.55
XPL2010-821ML_
0.82
0.068
0.075
132
1.25
XPL2010-102ML_
1.0
XPL2010-152ML_
1.5
XPL2010-222ML_
2.2
XPL2010-332ML_
3.3
XPL2010-472ML_
4.7
0.081
0.089
117
0.105
0.116
80
0.156
0.173
75
0.207
0.228
55
0.336
0.370
40
1.20
0.950
0.940
0.700
0.580
XPL2010-682ML_
6.8
XPL2010-822ML_
8.2
XPL2010-103ML_
10
XPL2010-183ML_
18
XPL2010-223ML_
22
0.421
0.463
33
0.457
0.503
30
0.555
0.611
28
1.47
1.60
31
1.89
2.00
25
0.450
0.440
0.390
0.500
0.410
XPL2010-333ML_
33
XPL2010-473ML_
47
XPL2010-563ML_
56
XPL2010-683ML_
68
XPL2010-823ML_
82
2.59
2.85
20
3.96
4.25
17
4.48
4.82
15
6.14
6.56
13
6.45
6.90
12
0.330
0.270
0.240
0.210
0.200
XPL2010-104ML_
100
XPL2010-224ML_
220
8.48
19.2
9.27
21.1
11
0.180
7.1
0.122
â Isat (A)5
20% drop 30% drop
3.45
3.75
2.75
3.05
2.35
2.64
1.95
2.19
1.65
1.90
1.60
1.30
1.20
0.925
0.750
1.80
1.50
1.35
1.05
0.845
0.620
0.600
0.525
0.560
0.470
0.725
0.670
0.610
0.590
0.510
0.380
0.300
0.280
0.250
0.240
0.410
0.320
0.300
0.280
0.260
0.214
0.143
0.232
0.161
â Irms (A)6
20°C riseâ 40°C rise
2.2
2.8
1.9
2.6
1.7
2.3
1.5
2.1
1.3
1.7
1.1
1.6
1.0
1.4
0.96
1.3
0.79
1.1
0.74
1.0
0.64
0.87
0.55
0.75
0.49
0.66
0.32
0.43
0.28
0.39
0.23
0.31
0.18
0.25
0.17
0.24
0.15
0.20
0.15
0.20
0.13
0.086
0.17
0.116
1. When ordering, please specify termination and packaging codes:
XPL2010-103MLC
Termination: L = RoHS compliant tin-silver-copper (96.5/3/0.5) over
tin over nickel over silver.
Special order: S = non-RoHS tin-lead (63/37).
Packaging: C = 7â³ machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter C instead.
D = 13â³ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (7500 parts per
full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at which the inductance drops the specified amount from its
value without current.
6. Current that causes the specified temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 âSoldering Surface Mount Componentsâ before soldering.
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
Document 646-1â Revised 06/15/12
© Coilcraft Inc. 2012
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check out web site for latest information.
|
▷ |