XFL5030 Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Shielded Power Inductors

Document 791-1
Shielded Power Inductors – XFL5030
• Exceptionally low DCR – only 2.15 mOhms
• Excellent current handling – up to 11.5 A
• 3.1 mm maximum height with a 5.48 mm × 5.28 mm footprint
Core material Composite
Terminations  RoHS compliant tin-silver over copper. Other termina-
tions available at additional cost.
Weight  0.42 – 0.50 g
Ambient temperature  –40°C to +125°C with (40°C rise) Irms current.
Maximum part temperature  +165°C (ambient + temp rise). Derating.
Storage temperature  Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging  400/7″ reel; 1500/13″ reel  Plastic tape:  16 mm wide,
0.3 mm thick, 12 mm pocket spacing, 3.18 mm pocket depth
PCB washing  Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.

  _{Part number}1
XFL5030-271ME_
XFL5030-561ME_
XFL5030-102ME_
XFL5030-222ME_
XFL5030-332ME_
XFL5030-472ME_
  _Inductance2 _{   }
±20% (µH)
0.27
0.56
1.0
2.2
3.3
4.7
  DCR (mOhms)³
typ
max
2.15
3.20
4.20
10.5
13.5
2.55
3.80
5.00
12.0
16.0
18.5
22.0
 SRF typ⁴
(MHz)
132
77.0
60.0
37.4
28.7
24.5
  ^{Isat (A)5}       ^{Irms (A)6}
10% drop 20% drop 30% drop 20°C rise 40°C rise
10.0
11.0
11.5
7.5
8.5
9.0
5.4
6.2
6.5
3.5
4.0
4.3
3.1
4.0
4.2
18.0
25.5
14.6
21.0
13.0
28.0
8.2
11.5
7.2
10.0
2.5
3.1
3.3
6.2
8.7
1. When ordering, please specify packaging code:
XFL5030-472MEC
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (400 parts per full reel).
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25
charge), use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked
(1500 parts per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at 25°C that causes an inductance drop of 30% (typ) from its value without current.
Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only
and does not represent absolute maximum ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Irms Testing
Irms testing was performed on
0.75 inch wide × 0.25 inch thick
copper traces in still air.
Temperature rise is highly
dependent on many factors
including pcb land pattern, trace
size, and proximity to other com-
ponents. Therefore temperature
rise should be verified in appli-
cation conditions.
US [phone] [e-mail]
UK [phone] [e-mail]
Taiwan [phone] [e-mail]
China [phone] [e-mail]
Singapore + 65-6484 8412 [e-mail]
Document 791-1  Revised 07/09/15
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.