|
XFL3012 Datasheet, PDF (1/4 Pages) Coilcraft lnc. – Shielded Power Inductors | |||
|
Document 747-1
Shielded Power Inductor â XFL3012
⢠High current, magnetically shielded power inductors
⢠3 mm à 3 mm footprint; 1.3 mm maximum height
Designerâs Kit C440 contains 5 of each XFL3012 and XFL3010 value
Core materialâComposite
Environmentalâ RoHS compliant, halogen free
Terminationsâ RoHS compliant tin-silver-copper (96.5/3/0.5) over tin over
nickel over silver-platinum. Other terminations available at additional cost.
Weightâ 53 mg
Ambient temperatureâ â40°C to +85°C with (40°C rise) Irms current.
Maximum part temperatureâ +125°C (ambient + temp rise). Derating.
Storage temperatureâ Component: â40°C to +125°C.
Tape and reel packaging: â40°C to +80°C
Resistance to soldering heatâ Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)â 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packagingâ 2000/7â³ reel; 7500/13â³ reelâ Plastic tape: 8 mm wide,
0.23 mm thick, 4 mm pocket spacing, 1.55 mm pocket depth
PCB washingâ Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
â Part number1
XFL3012-331ME_
XFL3012-561ME_
XFL3012-681ME_
XFL3012-102ME_
XFL3012-152ME_
XFL3012-222ME_
XFL3012-332ME_
XFL3012-472ME_
XFL3012-682ME_
XFL3012-103ME_
XFL3012-153ME_
XFL3012-223ME_
XFL3012-333ME_
XFL3012-393ME_
XFL3012-473ME_
XFL3012-563ME_
XFL3012-683ME_
XFL3012-823ME_
XFL3012-104ME_
XFL3012-224ME_
â Inductance2
±20% (µH)
0.33
0.56
0.68
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
39
47
56
68
82
100
220
âDCR (Ohms)3
nomââââ max
0.023
0.028
0.034
0.039
0.060
0.027
0.032
0.040
0.046
0.072
0.081
0.106
0.143
0.166
0.255
0.097
0.127
0.171
0.200
0.306
0.394
0.608
0.855
0.919
1.220
0.483
0.630
0.896
0.985
1.32
1.430
1.52
2.16
2.37
2.30
2.44
2.63
3.00
6.83
8.00
âSRF typ4
(MHz)
293
203
164
115
94.4
73.2
61.6
52.6
39.9
34.6
25.8
22.2
16.6
15.9
13.7
12.1
10.9
10.8
9.4
6.1
10% drop
2.3
1.8
1.6
1.4
1.3
1.0
0.87
0.72
0.61
0.50
0.43
0.32
0.23
0.23
0.21
0.19
0.16
0.15
0.17
0.09
â Isat (A)5
20% drop
3.0
2.5
2.2
1.9
1.8
1.3
1.2
1.0
0.84
0.65
0.58
0.45
0.32
0.32
0.28
0.26
0.21
0.21
0.24
0.14
30% drop
3.4
2.9
2.7
2.3
2.2
1.6
1.4
1.2
0.97
0.74
0.65
0.52
0.38
0.37
0.32
0.30
0.25
0.24
0.28
0.16
âIrms (A)6
20°C riseââ40°C rise
2.6
3.5
2.2
3.0
2.1
2.8
1.9
2.6
1.6
2.2
1.4
1.9
1.2
1.6
1.0
1.4
0.94
1.3
0.90
1.2
0.74
1.0
0.58
0.80
0.42
0.57
0.39
0.54
0.33
0.46
0.32
0.44
0.31
0.42
0.26
0.34
0.29
0.39
0.17
0.23
1. When ordering, please specify termination and packaging codes:
XFL3012-224MEC
Termination: E = RoHS compliant tin-silver-copper (96.5/3/0.5) over
tin over nickel over silver-platinum.
Special order:
S = non-RoHS tin-lead (63/37).
Packaging:
C = 7â³ machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter C instead.
D = 13â³ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (7500 parts
per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at 25°C that causes the specified inductance drop from its
value without current. Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient.
This information is for reference only and does not represent absolute
maximum ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 âSoldering Surface Mount Componentsâ before soldering.
Document 747-1â Revised 09/01/15
|
▷ |