XFL3010 Datasheet, PDF (1/4 Pages) Coilcraft lnc. – Shielded Power Inductors

Document 727-1
Shielded Power Inductors – XFL3010
• High current, magnetically shielded power inductors
• Only 1 mm high with a 3 mm × 3 mm footprint
Designer’s Kit C440 contains 5 of each XFL3010 and XFL3012 value
Core material Composite
Environmental  RoHS compliant, halogen free
Terminations  RoHS compliant tin-silver-copper (96.5/3/0.5) over tin over
nickel over silver-platinum. Other terminations available at additional cost.
Weight  44 mg
Ambient temperature  –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature  Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging  2000/7″reel; 7500/13″ reel  Plastic tape: 8 mm wide,
0.23 mm thick, 4 mm pocket spacing, 1.14 mm pocket depth
PCB washing  Only pure water or alcohol recommended

^  Inductance²
 DCR (Ohms)³
 SRF typ⁴
  _{Part number}1
±20% (µH)
nom     max
(MHz) 10% drop
XFL3010-601ME_
0.60
XFL3010-102ME_
1.0
XFL3010-152ME_
1.5
XFL3010-222ME_
2.2
XFL3010-332ME_
3.3
0.030
0.033
180
1.8
0.043
0.049
128
1.5
0.071
0.080
97.0
1.2
0.111
0.122
78.0
0.94
0.154
0.166
64.0
0.86
XFL3010-472ME_
4.7
XFL3010-682ME_
6.8
XFL3010-103ME_
10
XFL3010-153ME_
15
XFL3010-223ME_
22
0.217
0.315
0.472
0.521
0.770
0.230
0.346
0.519
0.560
0.818
57.0
0.71
42.0
0.56
35.0
0.44
28.4
0.33
21.7
0.26
XFL3010-333ME_
33
XFL3010-393ME_
39
XFL3010-473ME_
47
XFL3010-563ME_
56
XFL3010-683ME_
68
1.12
1.20
1.23
1.40
1.71
1.93
1.95
2.16
2.32
2.60
17.5
0.22
16.9
0.21
14.4
0.16
13.6
0.16
12.7
0.15
XFL3010-823ME_
82
XFL3010-104ME_
100
XFL3010-224ME_
220
2.77
3.10
4.64
5.50
9.91
12.0
11.6
0.14
10.1
0.13
6.9
0.08
  _{Isat (A)}5
20% drop 30% drop
2.4
2.7
2.1
2.4
1.6
1.9
1.2
1.5
1.1
1.3
0.97
1.1
0.78
0.92
0.61
0.71
0.45
0.53
0.35
0.40
0.30
0.35
0.29
0.33
0.23
0.27
0.22
0.25
0.21
0.24
0.20
0.23
0.19
0.22
0.12
0.14
  _{Irms (A)}5
20°C rise  40°C rise
1.8
2.5
1.6
2.3
1.4
1.9
1.0
1.3
0.88
1.2
0.84
1.1
0.72
0.95
0.62
0.82
0.56
0.76
0.48
0.66
0.41
0.56
0.37
0.51
0.33
0.44
0.3
0.41
0.27
0.36
0.26
0.34
0.20
0.29
0.14
0.19
1. When ordering, please specify packaging code:
XFL3010-222MEC
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at which the inductance drops the specified amount from its value without current.
6. Current that causes the specified temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
US [phone] [e-mail]
UK [phone] [e-mail]
Taiwan [phone] [e-mail]
China [phone] [e-mail]
Singapore + 65-6484 8412 [e-mail]
Document 727-1  Revised 07/03/12
© Coilcraft Inc. 2012
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check out web site for latest information.