XFL2006 Datasheet, PDF (1/3 Pages) Coilcraft lnc. – Shielded Power Inductors

Document 763-1
Shielded Power Inductors – XFL2006
• Lowest profile, ultra-miniature, shielded power inductor
• Soft saturation makes them ideal for VRM/VRD applications.
Designer’s Kit C434 contains 5 of each value and 5 of each XFL2005
Core material Composite
Core and winding loss  See www.coilcraft.com/coreloss
Environmental  RoHS compliant, halogen free
Terminations  RoHS compliant tin-silver-copper (96.5/3/0.5) over tin
over nickel over silver-platinum.
Weight  12 – 13 mg
Ambient temperature  –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature  Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging  2000/7″reel; 7500/13″ reel  Plastic tape:  8 mm wide,
0.28 mm thick, 4 mm pocket spacing, 0.76 mm pocket depth
PCB washing  Only pure water or alcohol recommended

  _{Part number}1
XFL2006-102ME_
XFL2006-222ME_
XFL2006-332ME_
XFL2006-472ME_
XFL2006-562ME_
XFL2006-682ME_
XFL2006-822ME_
XFL2006-103ME_
XFL2006-153ME_
XFL2006-223ME_
XFL2006-333ME_
XFL2006-473ME_
XFL2006-563ME_
XFL2006-683ME_
XFL2006-823ME_
XFL2006-104ME_
  _Inductance2
±20% (µH)
1.0
2.2
3.3
4.7
5.6
6.8
8.2
10.0
15.0
22.0
33.0
47.0
56.0
68.0
82.0
100.0
 DCR (Ohms)³
nom    max
0.153
0.278
0.460
0.665
0.75
0.169
0.306
0.506
0.732
0.825
0.92
1.02
1.08
1.19
1.27
1.40
2.02
2.22
2.78
3.06
4.45
4.90
5.60
6.16
6.65
7.32
8.50
9.35
9.25
10.18
11.10
12.25
 SRF typ⁴
(MHz)
170
110
88
68
61
57
51
45
37
30.5
24.0
19.5
16.5
16.0
13.5
13.0
10% drop
0.71
0.49
0.42
0.31
0.30
0.26
0.24
0.24
0.19
0.150
0.110
0.090
0.085
0.080
0.065
0.065
 Isat (A)⁵
20% drop 30% drop
1.0
1.2
0.69
0.78
0.56
0.66
0.44
0.52
0.43
0.50
0.35
0.33
0.31
0.25
0.205
0.41
0.39
0.37
0.29
0.240
0.150
0.130
0.120
0.115
0.090
0.180
0.155
0.145
0.135
0.115
0.090 0.115
 Irms (A)⁶
20°C rise  40°C rise
0.910
0.710
0.550
0.500
0.460
1.22
0.950
0.720
0.660
0.600
0.400
0.370
0.345
0.265
0.235
0.520
0.490
0.440
0.350
0.305
0.160
0.155
0.145
0.115
0.125
0.205
0.205
0.195
0.155
0.165
0.100
0.135
1. When ordering, please specify packaging code:
XFL2006-823MEC
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at which the inductance drops the specified amount from its value without current.
6. Current that causes the specified temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
US [phone] [e-mail]
UK [phone] [e-mail]
Taiwan [phone] [e-mail]
China [phone] [e-mail]
Singapore + 65-6484 8412 [e-mail]
Document 763-1  Revised 12/27/11
© Coilcraft Inc. 2012
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check out web site for latest information.