XAL6030-181MEC_16 Datasheet, PDF (1/4 Pages) Coilcraft lnc. – Shielded Power Inductors

Document 887-1
HIGH ^TEMPERATURE
Shielded Power Inductors – XAL60xx
• High current; very low DCR
• Soft saturation
• AEC-200 Grade 1 qualified (–40°C to +125°C ambient)
Designer’s Kit C442 contains 3 each of all values.
Core material Composite
Environmental  RoHS compliant, halogen free
Terminations  RoHS compliant tin-silver (96.5/3.5) over copper.
Other terminations available at additional cost.
Weight XAL6030: 0.60 – 0.70 g; XAL6060: 1.2 – 1.3 g
Ambient temperature  –40°C to +125°C with (40°C rise) Irms current.
Maximum part temperature  +165°C (ambient + temp rise). Derating.
Storage temperature  Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
PCB washing  Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.

  _{Part number}1
XAL6030-181ME_
XAL6030-331ME_
XAL6030-561ME_
XAL6030-102ME_
XAL6030-122ME_
XAL6030-182ME_
XAL6030-222ME_
XAL6030-332ME_
XAL6060-472ME_
XAL6060-562ME_
XAL6060-682ME_
XAL6060-822ME_
XAL6060-103ME_
XAL6060-153ME_
XAL6060-223ME_
  _Inductance2 _  DCR (mOhms)³
±20% (µH)
typ    max
0.18
1.59
1.75
0.33
2.30
2.53
0.56
3.01
3.31
1.0
5.62
6.18
1.2
6.82
7.50
1.8
9.57 10.52
2.2
12.70 13.97
3.3
19.92 20.81
4.7
13.10 14.40
5.6
14.46 15.90
6.8
18.90 20.80
8.2
24.00 26.40
10
27.00 29.82
15
39.77 43.75
22
55.12 60.63
 SRF typ⁴
(MHz)
141
89
61
50
43
34
30
26
21
20
18
16
14
11
9
 Isat⁵
(A)
39.0
30.0
29.0
23.0
22.0
18.2
15.9
12.2
10.5
9.9
9.2
8.4
7.6
5.8
5.6
Irms (A)⁶
20°C rise  40°C rise
24
32
20
25
17
22
13
18
12
16
10
14
7.0
10
6.0
8.0
8.0
11
7.5
10
7.0
9.0
6.0
8.0
5.0
7.0
4.5
6.0
3.6
5.0
Irms Testing
Irms testing was performed on
0.75 inch wide × 0.25 inch thick
copper traces in still air.
Temperature rise is highly
dependent on many factors
including pcb land pattern, trace
size, and proximity to other com-
ponents. Therefore temperature
rise should be verified in appli-
cation conditions.
1. When ordering, please specify termination and packaging codes:
XAL6060-223MEC
Termination: E = RoHS compliant tin-silver over copper.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape.
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added
($25 charge), use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked.
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at 25°C that causes an inductance drop of 30% (typ) from its value without current.
Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only
and does not represent absolute maximum ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
US [phone] [e-mail]
UK [phone] [e-mail]
Taiwan [phone] [e-mail]
China [phone] [e-mail]
Singapore + 65-6484 8412 [e-mail]
Document 887-1  Revised 07/13/16
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.