XAL6020 Datasheet, PDF (1/3 Pages) Coilcraft lnc. – Shielded Power Inductors

Document 801-1
Shielded Power Inductors – XAL6020
• High current and very low DCR
• Very low profile – only 2 mm tall
• Soft saturation, perfect for VRM/VRD applications
Core material Composite
Environmental  RoHS compliant, halogen free
Terminations  RoHS compliant tin-silver (96.5/3.5) over copper. Other
terminations available at additional cost.
Weight  0.6 – 0.7 g
Ambient temperature  –40°C to +125°C with (40°C rise) Irms current.
Maximum part temperature  +165°C (ambient + temp rise). Derating.
Storage temperature  Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging  500/7″ reel; 1500/13″ reel  Plastic tape:  16 mm wide,
0.3 mm thick, 12 mm pocket spacing, 2.16 mm pocket depth
PCB washing  Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
^  Inductance²   ^{DCR (mOhms)3}
  _{Part number}1 _{±20% (µH)}
typ    max
 SRF typ⁴
(MHz)
 Isat⁵
Irms (A)⁶
(A) 20°C rise  40°C rise
XAL6020-121ME_ 0.12
1.60
1.85
165
45
21.0
27.0
XAL6020-141ME_  has been changed to XAL6020-121ME_. The XAL6020-141 is not available.
XAL6020-161ME_ 0.16
2.35
2.70
152
41
20.0
26.0
XAL6020-271ME_ 0.27
3.45
3.85
97
29.5
19.0
25.0
XAL6020-321ME_  has been changed to XAL6020-271ME_. The XAL6020-321 is not available.
XAL6020-451ME_ 0.45
4.60
5.05
73
24.5
17.0
22.0
XAL6020-601ME_ 0.60
XAL6020-901ME_ 0.90
XAL6020-112ME_ 1.1
6.45
10.63
12.60
7.10
11.10
13.10
66
20.5
15.0
18.5
56
19.1
11.5
15.2
50
17.1
10.0
12.0
1. When ordering, please specify packaging code:
XAL6020-112MEC
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (500 parts per full reel).
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added
($25 charge), use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked
(2000 parts per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at 25°C that causes an inductance drop of 30% (typ) from its value without current.
Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only
and does not represent absolute maximum ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Irms Testing
Irms testing was performed on
0.75 inch wide × 0.25 inch thick
copper traces in still air.
Temperature rise is highly
dependent on many factors
including pcb land pattern, trace
size, and proximity to other
components. Therefore temper-
ature rise should be verified
in application conditions.
US [phone] [e-mail]
UK [phone] [e-mail]
Taiwan [phone] [e-mail]
China [phone] [e-mail]
Singapore + 65-6484 8412 [e-mail]
Document 801-1  Revised 07/13/16
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.