XAL1510_16 Datasheet, PDF (1/3 Pages) Coilcraft lnc. – Shielded Power Inductors

Document 947-1
Shielded Power Inductors XAL1510

  _{Part number}1
XAL1510-472ME_
XAL1510-682ME_
XAL1510-822ME_
XAL1510-103ME_
XAL1510-153ME_
XAL1510-223ME_
XAL1510-333ME_
  _Inductance2 _  DCR (mOhms)³
±20% (µH)
typ    max
4.7
3.35
3.80
6.8
4.17
4.60
8.2
6.00
7.50
10
6.80
9.00
15
9.17
12.4
22
14.5
16.0
33
18.7
20.0
1. When ordering, please specify packaging code:
XAL1510-103MED
Packaging: D = 13″ machine-ready reel. EIA-481 embossed plastic
tape (150 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter D instead.
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at 25°C that causes an inductance drop of 30% (typ) from
its value without current.
Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient.
This information is for reference only and does not represent absolute
maximum ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
• High current; very low DCR
• AEC-Q200 Grade 1 qualified (–40°C to +125°C ambient)
• Soft saturation makes them ideal for VRM/VRD applications.
Core material Composite
Core and winding loss  Go to online calculator
Environmental  RoHS compliant, halogen free
Terminations  RoHS compliant tin-silver over copper. Other
terminations available at additional cost.
Weight  12.4 – 15.0 g
Ambient temperature  –40°C to +125°C with (40°C rise) Irms current.
Maximum part temperature  +165°C (ambient + temp rise). Derating.
Storage temperature  Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging  150/13″ reel  Plastic tape:  32 mm wide, 0.3 mm thick,
24 mm pocket spacing, 10.26 mm pocket depth (all except -333)
11.26 mm pocket depth (-333 only).
PCB washing  Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
 SRF typ^{4  } Isat⁵
(MHz)
(A)
12.7
39.0
11.5
36.0
10.8
30.0
10.1
26.3
8.0
23.0
6.3
18.7
5.8
16.7
  _{Irms (A)}6
20°C rise 40°C rise
21
29
19
26
18
24
16
22
13
18
10.5
14
8.6
12
Irms Testing
Irms testing was performed on 0.75 inch wide × 0.25 inch thick
copper traces in still air.
Temperature rise is highly dependent on many factors including
pcb land pattern, trace size, and proximity to other components.
Therefore temperature rise should be verified in application
conditions.
US [phone] [e-mail]
UK [phone] [e-mail]
Taiwan [phone] [e-mail]
China [phone] [e-mail]
Singapore + 65-6484 8412 [e-mail]
Document 947-1  Revised 07/13/16
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.