UCC3580 Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Planar Magnetics

Document 357-1
Planar Magnetics ForTexasInstruments
UCC3580
This planar transformer and planar inductor pair is de-
signed specifically for the Texas Instruments UCC3580
family of PWM controllers.
The B0392-AL transformer is engineered for use in single
switch, forward topologies operating at 300 kHz. It is ideal
for use in high-current telecom power supply applications
that require high efficiency in a low-profile package.
The main winding of the B0434-AL inductor serves as an
output choke, while the auxiliary winding controls input
current to the PWM.
Request free evaluation samples by contacting Coilcraft
or visiting www.coilcraft.com.
Transformer

Part
Output
Output
 number¹ power (W) voltage (V)
Output
Primary
Leakage
  _{current  inductance}2   _inductance3
DCR max
(A rms)
min (µH)
max (µH)
(mOhms)
B0392-AL_
100
3.3
30.0
65.0
0.22

Primary: 13.5
Secondary:   0.4
Pri/sec
isolation
(Vdc)
1500
1. When ordering, please specify packaging code:
Packaging:
B0392-ALD
D = 13″ machine ready reel. EIA-481 embossed plastic
tape (200 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter D instead.
2. Inductance measured on an Agilent/HP 4284 between pins 1 and 2 at
250 kHz, 0.1 Vrms, 0 Adc.
3. Leakage inductance measured between pins 1 and 2 at 100 kHz, 0.1 Vrms,
0 Adc with secondary pins shorted.
4. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
0.920
23,37
max
1
0.810 _max
20,57
4
2
3
Parts manufactured prior
to December 2011 may
be marked differently.
0.290
7,37
0.200
5,08
0.080
2,03
Ø
0.800
20,32
1
4
2
3
Recommended
Land Pattern
0.125
3,18
0.110
2,79
Ø
1
3
Pri
Sec
2
4
6 :1
0.340 _max
8,64
0.006 /0,15
Dimensions are in
inches
mm
US [phone] [e-mail]
UK [phone] [e-mail]
Taiwan [phone] [e-mail]
China [phone] [e-mail]
Singapore + 65-6484 8412 [e-mail]
Document 357-1  Revised 07/24/12
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.